Abstract:Abstract The windage loss in rotor‐stator gap has an important effect on rotating machinery, especially with higher rotational speed and fluid density. However, the mechanism of axial flow on windage loss in open shaft‐type gap is hardly studied in most literature. To clarify it, the influences of axial Reynolds number Reu and rotational Reynolds number Reω on skin friction coefficient Cf are investigated, and flow characteristics are analyzed with different gap geometry, radius ratio η. First, the results reveal that the Cf remains constant when Reu is less than 2.8 × 104 and increases rapidly as Reu when Reu ≥ 2.8 × 104, which indicates that the effect of axial velocity u on Cf is negligible for low Reu. The positive relative deviation Δ suggests that the axial flow makes windage loss and Cf rise. Besides, a larger number of Taylor vortexes fill with gap when the effect of the centrifugal force is larger than that of the inertial force, but they gradually disappear as Reu. Subsequently, the Cf and Δ increase as η, highlighting that the effect of u on windage loss and Cf is more prominent for larger η. The fact that vorticity near walls is larger than that at the center of gap reveals that windage loss arises from the interaction between walls and fluid rather than the dissipation with fluid itself. Finally, the model of Cf in shaft‐type gap is proposed in different Reω ranges based on numerical results, and the maximum sum of squares error of 1.02 × 10−5 and minimal R2 of 0.969 satisfy the requirement of fitting accuracy and indicate that the fitting model can accurately predict Cf. The conclusions significantly help predict windage loss in open shaft‐type gap with axial flow, and further improve the design for generators of supercritical CO2 turbine‐alternator‐compressor unit.

Research on Windage Losses of Smooth Rotor Supported by Active Magnetic Bearings in a Vacuum Chamber

Analytical investigation of open-circuit eddy current loss in windings of PM machines

Enhanced Ventilation and Thermal Performance by Skewed Through Holes on Rotor Yoke in Forced Air-Cooled Permanent Magnet Wind Generators

Simplified Analytical Model and Investigation of Open-Circuit AC Winding Loss of Permanent-Magnet Machines.

Experimental Investigation on Unbalance Response of a Shear-type Magnetorheologic Grease Damper Flexible Rotor System

Experimental and Theoretical Investigation on Dynamic Behavior of a Flexible Rotor Supported on a Shear-Type Magnetorheologic Fluid Damper

Loss Estimation of Brushless Doubly-Fed Generator with Hybrid Rotor Considering Multiple Influence Factors

Ventilation System Design and Rotor Air Friction Loss of High-Speed Permanent Magnet Machines.

Study On Air Friction Loss Of High Speed Pm Machine

Investigation of Bessel Functions in Analytical Modeling of Rotor Eddy Current Losses in PM Machine Rotor with Copper Shield

Analysis of Axial Windage Loss in Air Gap of High-Speed Motors under High Taylor Number

Analysis of the dry whirl and dry whip response in a vertical active magnetic bearing drop test rig

Rotating Loss Analysis for Active Magnetic Bearing with Solid Rotating Rotor

Loss Analysis of High Speed Permanent Magnet Synchronous Motor

Experimental Researches on the Power Loss of Rotor System with Dimensional Errors

Action Mechanism of Axial Flow on Windage Loss in Open Shaft‐type Gap with CO2

Study on fluid friction loss on rotor surface of FeCo based high speed permanent magnet motor

Skin-Friction Coefficient Model Verification and Flow Characteristics Analysis in Disk-Type Gap for Radial Turbomachinery

Comparative Study of Ferrofluid Cooling for Permanent Magnet Machines With Different Winding Structures

Investigation of the Effect of Cavitation and Journal Whirl on Static and Dynamic Characteristics of Journal Bearing

Loss Calculation, Analysis, and Separation Method of 550 000 r/min Ultrahigh-Speed Permanent Magnet Motor