Abstract:Precise size control and general synthesis of ultrafine noble metal-based catalysts are very important in electrochemical energy conversion technologies. Herein, we develop the ultrafine MCu (M = Pt, Au, and Pd) alloy nanoparticles anchored on the porous N-doped carbon nanofibers (MCu/p-NCNFs) by the electroless deposition method. The as-prepared MCu alloy nanoparticles possess ultrafine particles sizes (<10 nm) and are uniformly anchored on p-NCNFs, which are derived from electrospun polyacrylonitrile (PAN) nanofibers. Owing to the desired composition and structure, the as-prepared PtCu/p-NCNFs with an ultrafine alloy size (≈3.5 nm) exhibits significantly enhanced electrocatalytic activity and stability toward methanol electrooxidation as well as the outstanding CO antipoisoning ability. This work offers a new general strategy for the fabrication of ultrafine alloy nanoparticles on a porous nitrogen-doped carbon support as highly efficient electrocatalysts for energy-related applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.jpcc.0c03460?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.jpcc.0c03460</a>.Schematic illustration for the fabrication of MCu/p-NCNFs; SEM and TEM images with low magnification of as-prepared Cu/p-NCNFs; TEM image with high magnification of as-prepared Cu/p-NCNFs; SEM image with high magnification of as-prepared PtCu/p-NCNFs; CVs of the p-NCNFs in 0.5 M H2SO4 aqueous solution at 10 mV s–1; TEM image and size distribution of PtCu NPs; TEM images of PtCu/p-NCNFs synthesized using 3.5, 5, and 7 mM H2PtCl6 aqueous solution; XRD patterns of PtCu/p-NCNFs synthesized using different concentrations of H2PtCl6 aqueous solution and different time of electroless deposition; TEM images of PtCu/p-NCNFs synthesized by 5, 20, and 60 min electroless deposition; schematic illustration of metal nanoparticle deposition on carbon nanotubes via the substrate-enhanced electroless deposition process in previous studies; N2 adsorption–desorption isotherm and pore size distribution curve, survey XPS spectra, and C 1s XPS spectra of Cu/p-NCNFs and PtCu/p-NCNFs; CV curves in 0.5 M H2SO4 + 1 M CH3OH at 50 mV s–1; CV curves of PtCu/p-NCNFs and commercial Pt/C from the 1st to 200th cycle; TEM images of the PtCu/p-NCNFs and PtCu NPs after 200 cycles; histograms for size distribution of alloy nanoparticles in as-prepared PdCu/p-NCNFs and AuCu/p-NCNFs; EDS spectra of PdCu/p-NCNFs and AuCu/p-NCNFs; comparisons of the experimental parameters of as-reported research studies that use the SEED method to fabricate the MNPs/C system; and composition of different PtCu/p-NCNFs samples based on the ICP-AES analysis (<a class="ext-link" href="/doi/suppl/10.1021/acs.jpcc.0c03460/suppl_file/jp0c03460_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Facile Coupling of Content Design and Efficient Modulation on the Activity of CNT-supported PdAgCu Nanoparticle Electrocatalysts: Leaching Lift-Up and Annealing Fall-off

PdCu Alloy Nanodendrites with Tunable Composition As Highly Active Electrocatalysts for Methanol Oxidation

Facile Synthesis of Ptcu3 Alloy Hexapods and Hollow Nanoframes As Highly Active Electrocatalysts for Methanol Oxidation

Electron-enriched Single-Pd-sites on G-C3n4 Nanosheets Achieved by In-Situ Anchoring Twinned Pd Nanoparticles for Efficient CO2 Photoreduction

Facile Synthesis of Ternary PtPdCu Alloy Hexapods As Highly Efficient Electrocatalysts for Methanol Oxidation

Mixed‐PtPd‐Shell PtPdCu Nanoparticle Nanotubes Templated from Copper Nanowires As Efficient and Highly Durable Electrocatalysts

Facile Cu3P-C Hybrid Supported Strategy to Improve Pt Nanoparticle Electrocatalytic Performance Toward Methanol, Ethanol, Glycol and Formic Acid Electro-Oxidation

Facile syntheses and electrocatalytic properties of porous Pd and its alloy nanospheres

Tuning the surface structure and phase structure of PtCu 3 nanoparticle for highly efficient electrocatalysts

Surface restructuring in AgCu single-atom alloy catalyst and self-enhanced selectivity toward CO2 reduction

Influence of alloying and surface overcoating engineering on the electrochemical properties of carbon-supported PtCu nanocrystals

General Synthesis of Ultrafine Cu-Based Alloy Nanoparticles Anchored on Porous N-Doped Carbon Nanofibers for Enhanced Electrocatalytic Performance

Morphological and Compositional Design of Pd-Cu Bimetallic Nanocatalysts with Controllable Product Selectivity toward CO2 Electroreduction

Cu Tailoring Pt Enables Branched‐Structured Electrocatalysts with High Concave Surface Curvature Toward Efficient Methanol Oxidation

Synthesis of Ultrathin and Composition-Tunable PdPt Porous Nanowires with Enhanced Electrocatalytic Performance

An Efficient Antimony Doped Tin Oxide and Carbon Nanotubes Hybrid Support of Pd Catalyst for Formic Acid Electrooxidation

Nanophase-separated ternary PdAgCu nanotubes with rich interfaces for enhanced formic acid oxidation reaction

Seeded growth of PdPtAg-on-Au heterogeneous nanoplates for efficient methanol oxidation Reaction: Interface engineering in quaternary metallic electrocatalysts

Preparation and Application in Assembling High-Performance Fuel Cell Catalysts of Colloidal PtCu Alloy Nanoclusters

PdCu Alloy Nanoparticles Supported on CeO2 Nanorods: Enhanced Electrocatalytic Activity by Synergy of Compressive Strain, PdO and Oxygen Vacancy

Nano‐Multiactive Sites Pd/PdO/CuO/PdCu3 Formed In Situ on the Surface Hetero‐Organometallic Pd(II)/Cu(II) Nanosheet: Investigation on the Formation of Active Sites, Synergistic, and Catalytic Activity