Abstract:In order to better understand the dynamic response and failure modes of rock slopes containing weak interlayers subjected to earthquake excitation, a series of numerical simulations were carried out using the continuum-discontinuum element method (CDEM), considering the influence of seismic amplitude and weak interlayers inclination. The seismic response characteristics of slopes were systematically analyzed according to the waveform characteristics, amplification effect, equivalent crack ratio, etc. The numerical results show that the acceleration waveform characteristics and peak ground displacement (PGD) amplification coefficient have good correspondence with the dynamic failure process of landslides. Comprehensive analysis of waveform characteristics and PGD amplification coefficient can determine the damage time, damage location, and damage degree of landslides. The landslide process can be divided into three stages according to the equivalent crack ratio: rapid generation of a large number of microcracks, expansion and aggregation of microcracks, and penetration of micro-cracks and the formation of slip surfaces. The equivalent crack ratio provides a new idea for evaluating slope stability. In addition, under the combination of different amplitudes and weak interlayers, these earthquake-induced landslides exhibit different failure modes: the failure of the gentle-dip slope is mainly local rockfall; The mid-dip and steep-dip slopes with small amplitudes experience “tensile cracking-slip-collapsing” failure; The steep-dip slopes under strong earthquake failed in the form of “tensile cracking-slip-slope extrusion-collapsing”. The research results are of great significance for a deeper understanding of the formation mechanism of rock landslides with weak interlayers and the prevention of such landslide disasters.

Simulated Crack and Slip Plane Propagation in Soil Slopes with Embedded Discontinuities Using XFEM

Multiscale Modeling of Seepage-Induced Suffusion and Slope Failure Using a Coupled FEM–DEM Approach

Simulation of the failure process of landslides based on extended finite element method

Numerical Simulations of Arbitrary Evolving Cracks in Geotechnical Structures Using the Nonlinear Augmented Finite Element Method (N-AFEM)

Simulation Of Crack Propagation In Asphalt Concrete Pavement At Low Temperature Using Extended Finite Element Method

XFEM Simulation of Soil Crack Evolution Process Considering the Stress Concentration and Redistribution at the Crack Tip

Numerical Modeling of Failure Process of Soil Slopes

DEM–FEM Analysis of Soil Failure Process Via the Separate Edge Coupling Method

A sophisticated simulation for the fracture behavior of concrete material using XFEM

A Numerical Analysis with Scaled Boundary Finite Element Method to Simulate Mixed-mode Crack Propagation for Concrete Beams

Analyzing Multiple Crack Propagation Using Extended Finite Element Method (X-FEM)

Finite Element Modelling of Complex 3D Static and Dynamic Crack Propagation by Embedding Cohesive Elements in Abaqus

Development of X-FEM Methodology and Study on Mixed-Mode Crack Propagation

Development of an SPH-based method to simulate the progressive failure of cohesive soil slope

Mixed Integration Scheme for Embedded Discontinuous Interfaces by Extended Finite Element Method

Dynamic stability analysis of jointed rock slopes using the combined finite-discrete element method (FDEM)

Development X-FEM to investigate crack propagation in inhomogeneous materials

Improved XFEM (IXFEM): Arbitrary multiple crack initiation, propagation and interaction analysis

Simulation of the Q2 loess slope with seepage fissure failure and seismic response via discrete element method

Coupled Hydro-Mechanical Analysis for Rainfall-Induced Failure of Fractured Rock Slopes

Numerical Investigation on Dynamic Response and Failure Modes of Rock Slopes with Weak Interlayers Using Continuum-Discontinuum Element Method