Abstract:Theoretical and numerical analyses for nonlinear vibrations of the shape memory alloy hybrid composite(SMAHC) beam actuated by the pre-stretched shape memory alloy(SMA) fibers with tension-bending coupling effect are presented in this paper. Under the sudden action of thermal temperature, a recovery force and moment are caused in the SMAHC beam due to the phase transition in the SMA fibers, exciting the nonlinear vibration of the SMAHC beam. The one-dimensional Brison constitutive model was adopted to express the influence of the phase transition temperature, initial volume fraction of martensite, and pre-strain on the phase transition in the shape memory alloy. On this basis, the constitutive law of the SMAHC beam is built by considering the tension-bending coupling effect and the phase transition in the SMAHC beam. The equation of motion for nonlinear vibration of the SMAHC beam with geometric nonlinearity and material nonlinearity is derived from the Hamilton principle and is discretized into matrix form using the Galerkin method. According to the algorithm of the NewMark-β method, numerical solutions are computed by developing Matlab program and are compared with the results from ABAQUS analysis. It shows that the frequencies and amplitudes of the theoretical calculations are very consistent with those obtained from ABAQUS analysis. In addition, both the theoretical study and ABAQUS simulation indicates that the high frequency for longitudinal vibration is not observed in the spectrum diagram of transverse vibration, while the low frequencies for transverse vibration are captured in the longitudinal vibration. With the established Matlab program, parametric study is carried out to investigate the effect of the temperature and the location of the SMA fibers on the vibration responses of the SMAHC beam. The results from this study indicate that the transverse vibration of SMAHC beams is characterized as one of low frequency, while the longitudinal vibration has the characteristics of high frequency. Especially in the case of nonlinear vibration, not only the vibration of high frequency but also the vibration of low frequency observed in the transverse vibration will occur in the longitudinal direction of the SMAHC beam. Furthermore, the double and triple fundamental frequencies of the transverse vibration are excited in the nonlinear vibration of the SMAHC beam. The results of this paper can provide a theoretical basis for the evaluation of the safety and stability of smart composite structures.

Vibration control and analysis of a rotating flexible FGM beam with a lumped mass in temperature field

Nonlinear Thermo-Electro-mechanical Responses and Active Control of Functionally Graded Piezoelectric Plates Subjected to Strong Electric Fields

Active Vibration Control of Timoshenko Sigmoid Functionally Graded Porous Composite Beam with Distributed Piezoelectric Sensor/Actuator in a Thermal Environment

Vibration suppression of a rotating functionally graded beam with enhanced active constrained layer damping treatment in temperature field

Application of the generalized differential quadrature method to study vibration and dynamic stability of tri-directional functionally graded beam under magneto-electro-elastic fields

Bending and vibration of functionally graded material sandwich plates using an accurate theory

ANALYSIS OF NON-LINEAR PIEZOTHERMOELASTIC LAMINATED BEAMS WITH ELECTRIC AND TEMPERATURE EFFECTS

Flexoelectric Control of Beams with Atomic Force Microscope Probe Excitation

Multiflexoelectric Actuation and Control of Beams

Stochastic Vibration Suppression Analysis of an Optimal Bounded Controlled Sandwich Beam with MR Visco-Elastomer Core

Vibration control with the converse flexoelectric effect on the laminated beams

Nonlinear aeroelastic analysis and active flutter control of functionally graded piezoelectric material plate

Simulation and Experiment of Active Vibration Control Based on Flexible Piezoelectric MFC Composed of PZT and PI Layer

Dynamic modeling for rotating composite Timoshenko beam and analysis on its bending-torsion coupled vibration

Dynamic modeling and analysis of rotating FG beams for capturing steady bending deformation

The free and forced vibration behavior analysis of multi-stepped FGP-GPLRC curved beam with general boundary conditions

A multi-physics coupling formulation for vibro-acoustic analysis of FGMEE plates

Active control of thermally induced vibrations of temperature-dependent FGM circular plate with piezoelectric sensor/actuator layers

Vibration analysis of functionally graded porous piezoelectric deep curved beams resting on discrete elastic supports

Active Vibration Control of Composite Cantilever Beams

Nonlinear vibration of SMA hybrid composite beams actuated by embedded pre-stretched SMA wires with tension-bending coupling effect