Abstract:Noble-metal nano-hole arrays that generate EOT phenomenon are a promising label-free surface plasmon resonance (SPR) biochemical sensor [1]. Cellular response detection by other SPR sensors (Kretschmann prism and photonic crystal) has been successful [2]. However, limited by the high cost of earlier nano-hole fabrication techniques such as FIB/EBL, the EOT-based biochemical sensors had only ~10x10 μm scale of nano-holes and thus were applied mostly in detecting molecules [1], which need only a small area of sensing elements. Recently, a template-stripping technique to fabricate large area (~1x1 cm) of nano-holes was reported [3], which enables EOT-based measurement of cellular events. Prior studies [4] showed that the cell adhesion on the nano-holes can result in a change in effective refractive index (RI), which, in turn, leads to a spectral shift in the transmission peak. Therefore, we hypothesize that the EOT-based sensors are capable of label-free monitoring the cellular effects of toxic chemicals that change cell adhesion conditions. The integrated microfluidic device and measuring system shown in Fig. 1 was used to monitor the cellular response quantified by the EOT spectral shift in association with chemical stimuli. Gold film perforated with nano-hole arrays on a glass substrate was fabricated by depositing 100-nm-thick gold on a nano-hole-patterned silicon template and template-stripped onto the glass slide with UV curable epoxy [3]. PDMS microfluidic channels with an inlet and an outlet were fabricated by soft lithography and align-bonded with a gold-film-coated glass slide. After washing and sterilization of the device, cells were cultured on the cystimine-modified gold surface till confluent. Then the device was placed under a microscope connected to a spectrometer to record the spectral response (Fig. 2) to chemical stimuli applied via the microfluidic channels. Using the spectrum at t=0 as baseline, the spectral shift at different times was acquired as a function of the chemical concentration. In addition to chemical stimuli reported here, the same system can be used to characterize the cell response to electrical stimuli in the future. We applied three types of chemical stimuli to HEK293 cells in experiments. The first was trypsin that breaks the collagen links between cells and the substrate. Fig. 3 shows the spectral shift for 0.05% trypsin in PBS. The spectral shift has a logarithmic time dependence, which fits well with the first order reaction mode of enzyme. The spectrum was blue-shifted because the effective RI near gold surface decreased as the cell were gradually detached from the substrate. The second stimulus was lipopolysaccharide (LPS), which is a cell toxic chemical known to flatten and expand cells. Fig. 4 plots the spectral shift for different concentrations of LPS, showing a red-shifted spectrum with increased time and concentration, which was attributed to a greater RI near the sensor surface due to increased cell adhesion on the gold nano-holes. The third stimulus was sodium azide, which, in contrast to LPS, makes cells to transform and shrink. As expected, the spectrum in Fig. 5 was blue-shifted, since the effective RI dropped in response to weaker cell adhesion. These results demonstrate the capability of our EOT-based microfluidic biosensor for label-free monitoring of cellular responses to external stimuli.

Plasmonic Al Nanopyramid Array Sensor for Monitoring the Attaching and Spreading of Cells

Plasmonic Nano-Arrays for Ultrasensitive Bio-Sensing

Nanoplasmonic Biosensor Using Localized Surface Plasmon Resonance Spectroscopy for Biochemical Detection.

Nanoplasmonic Biosensor: Coupling Electrochemistry to Localized Surface Plasmon Resonance Spectroscopy on Nanocup Arrays.

Cell-based biosensors based on light-addressable potentiometric sensors for single cell monitoring.

Mutual promotion of electrochemical-localized surface plasmon resonance on nanochip for sensitive sialic acid detection.

Bioelectronic modulation of single-wavelength localized surface plasmon resonance (LSPR) for the detection of electroactive biomolecules

Reproducible Plasmonic Nanopyramid Array of Various Metals for Highly Sensitive Refractometric and Surface-Enhanced Raman Biosensing.

Label-free and real-time monitoring of single cell attachment on template-stripped plasmonic nano-holes.

In Situ Analysis of Membrane‐Protein Binding Kinetics and Cell–Surface Adhesion Using Plasmonic Scattering Microscopy

Electrochemistry Coupling Localized Surface Plasmon Resonance for Biochemical Detection.

An Aptamer Based Wall-Less LSPR Array Chip for Label-Free and High Throughput Detection of Biomolecules.

Development of Liquid-Phase Plasmonic Sensor Platforms for Prospective Biomedical Applications

Label-Free Imaging of Nanoscale Displacements and Free-Energy Profiles of Focal Adhesions with Plasmonic Scattering Microscopy.

High sensitivity plasmonic biosensor based on nanoimprinted quasi 3D nanosquares for cell detection

<span><strong>A NANO-PLASMONIC MICROFLUIDIC BIOSENSOR FOR LABEL-FREE MONITORING OF LIVING CELL RESPONSE TO CHEMICALS</strong></span>

Aluminum nanopyramid array with tunable ultraviolet-visible-infrared wavelength plasmon resonances for rapid detection of carbohydrate antigen 199.

Smart Surface-Enhanced Resonance Raman Scattering Nanoprobe for Monitoring Cellular Alkaline Phosphatase Activity during Osteogenic Differentiation

Nanoplasmonic Affinity Analysis System for Molecular Screening Based on Bright‐Field Imaging

Recent Advances in Plasmonic Nanostructures Applied for Label‐free Single‐cell Analysis

Engineering a Hierarchical Al Nanocap Array with Tunable Plasmonic Properties for Sensing Applications