Abstract:Multilayer flame-retardant coatings, consisting of opposite-charged polyelectrolyte polyethyleneimine (PEI), ammonium polyphosphate (APP) and polyacrylic acid (PAA), were constructed on the surface of soft and porous ramie fabrics by layer-by-layer (LBL) assembly technique. Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and field-emission scanning electron microscopy with an energy-dispersive X-ray (SEM-EDX) analysis confirmed that PAA was successfully introduced into the bi-component PEI/APP multilayer flame-retardant coatings. The P/C (phosphorus/carbon) ratio was clearly increased on the surface of the ramie fabric with the increase of the number of layers. The effect of PAA as a supplementary acid source on the flame retardancy of the treated ramie fabrics was studied by thermogravimetic analysis (TGA), microscale combustion calorimetry (MCC) and vertical flame testing (VFT). The results of the thermal properties showed that the char residue of the coated fabrics at high temperature during thermogravimetric analysis was significantly enhanced as compared with the untreated sample. Furthermore, the microscale combustion calorimetry revealed a reduction for both peak heat release rate (PHRR) and total heat release (THR). The surface morphologies of all the untreated and treated ramie fabrics after VFT demonstrated that the PEI/APP/PAA coated specimen preserved the integrity of the original texture of the ramie fabrics, and a dense and continuous expansion carbon layer was formed on the surface of the ramie fabric. The carbon layer effectively prevented oxygen and heat from penetrating into the substrate, thereby giving the ramie fabric excellent self-extinguishing properties. EDX spectra also revealed that the ratio of P/O (phosphorus/oxygen) and P/C of the char of the treated ramie fabric became high after combustion test. Compared to the bi-component (PEI/APP)n sample, the introduction of the third component PAA seemed to work at low assembly cycles by increasing the charge density of PEI, thus to improve the add-on of the FR coating on the fabric, but the concentration of PAA had little influence on the assembly process. However, the same charges may repel each other from the confusion of APP and PAA with high layers, causing the FR effect not that favorable.

A Facile Strategy to Simultaneously Improve the Mechanical and Fire Safety Properties of Ramie Fabric-Reinforced Unsaturated Polyester Resin Composites

Preparation and properties of intumescent flame retardant multilayer coatings treated ramie fabric/benzoxazine resin laminates

Preparation of Ramie/Benzoxazine Laminate and its Modification for Flame Retarding

Flame-Retarding Modification for Ramie/Benzoxazine Laminates and the Mechanism Study

On the Flameproof Treatment of Ramie Fabrics Using a Spray-Assisted Layer-by-layer Technique

Flame Retardancy of Ramie Fabrics Treated by Layer-by-layer Assembly Technique of Tri-component PEI/PAA/APP

Construction of Multilayer Coatings for Flame Retardancy of Ramie Fabric Using Layer‐by‐layer Assembly

Fabrication of flame retardant benzoxazine semi-biocomposites reinforced by ramie fabrics with bio-based flame retardant coating

Fabrication and Properties of PEI/APP Layer‐by‐layer Coated Ramie Fabric Combined with Low‐temperature Plasma Treatment

Preparation and properties of flame retarded ramie/phenolic resin composites

Flame retarding and reinforcing modification of ramie/polybenzoxazine composites by surface treatment of ramie fabric

Flame-retardant Coating by Alternate Assembly of Poly(vinylphosphonic Acid) and Polyethylenimine for Ramie Fabrics

Preparation and properties of APP flame-retardant ramie fabric reinforced epoxy resin composites

Hierarchical Structure: An effective Strategy to Enhance the Mechanical Performance and Fire Safety of Unsaturated Polyester Resin

Construction of Bio-Based Ramie Fabric/epoxy Resin Composites with High Flame Retardant and Mechanical Performances

Modification of Ramie Fabric with a Metal‐ion‐doped Flame‐retardant Coating

Fabrication and Properties of Biobased Layer-by-Layer Coated Ramie Fabric-Reinforced Unsaturated Polyester Resin Composites

Construction of Hierarchical Natural Fabric Surface Structure Based on Two-Dimensional Boron Nitride Nanosheets and Its Application for Preparing Biobased Toughened Unsaturated Polyester Resin Composites

Multi-walled Carbon Nanotubes Encapsulated by Graphitic Carbon Nitride with Simultaneously Co-Doping of B and P and Ammonium Polyphosphate to Improve Flame Retardancy of Unsaturated Polyester Resins

Effects of flame‐retardant ramie fiber on enhancing performance of the rigid polyurethane foams

Iron tailing/ammonium polyphosphate system in RPUF composites to enhancing fire safety: a novel strategy for utilization of metallurgical solid waste