Abstract:Graphical and Lay Summary The heterogenous production conditions in large‐scale bioreactors cause scale‐up problems, such as reduced biomass or product yield, to occur during bioprocesses. In this study, we designed a two‐compartment scale‐down reactor and used it to simulate large‐scale heterogenous production conditions, allowing us to understand these scale‐up problems and identify solutions at the laboratory scale. A computational fluid dynamics simulation was used for the design and detailed characterization of the scale‐down setup, as this simulation can model the production scale and support improved bioprocess scale‐up in the future. The scale‐up of bioprocesses remains one of the major obstacles in the biotechnology industry. Scale‐down bioreactors have been identified as valuable tools to investigate the heterogeneities observed in large‐scale tanks at the laboratory scale. Additionally, computational fluid dynamics (CFD) simulations can be used to gain information about fluid flow in tanks used for production. Here, we present the rational design and comprehensive characterization of a scale‐down setup, in which a flexible and modular plug‐flow reactor was connected to a stirred‐tank bioreactor. With the help of CFD using the realizable k‐ε model, the mixing time difference between a 20 and 4000 L bioreactor was evaluated and used as scale‐down criterion. CFD simulations using a shear stress transport (SST) k‐ω turbulence model were used to characterize the plug‐flow reactor in more detail, and the model was verified using experiments. Additionally, the model was used to simulate conditions where experiments technically could not be performed due to sensor limitations. Nevertheless, verification is difficult in this case as well. This was the first time a scale‐down setup was tested on high‐cell‐density Escherichia coli cultivations to produce industrially relevant antigen‐binding fragments (Fab). Biomass yield was reduced by 11% and specific product yield was reduced by 20% during the scale‐down cultivations. Additionally, the intracellular Fab fraction was increased by using the setup. The flexibility of the introduced scale‐down setup in combination with CFD simulations makes it a valuable tool for investigating scale effects at the laboratory scale. More information about the large scale is still necessary to further refine the setup and to speed up bioprocess scale‐up in the future.

A systematic mass-transfer modeling approach for mammalian cell culture bioreactor scale-up

Converting a Mab Downstream Process from Batch to Continuous Using Process Modeling and Process Analytical Technology.

Development and Qualification of a Scale-Down Mammalian Cell Culture Model and Application in Design Space Development by Definitive Screening Design

Study on Scale-Up of Anaerobic Fermentation Mixing with Different Solid Content

Numerical Simulation of Scaling-Up an Inverted Frusto-Conical Shaking Bioreactor with Low Shear Stress for Mammalian Cell Suspension Culture

CHO cell productivity improvement by genome-scale modeling and pathway analysis: Application to feed supplements

An in-silico analysis of hydrodynamics and gas mass transfer characteristics in scale-down models for mammalian cell cultures

A Novel Scale-Up Strategy for Cultivation of BHK-21 Cells Based on Similar Hydrodynamic Environments in the Bioreactors.

Novel scale-up strategy based on three-dimensional shear space for animal cell culture

Mimicking CHO large‐scale effects in the single multicompartment bioreactor: A new approach to access scale‐up behavior

A Single Dynamic Metabolic Model Can Describe mAb Producing CHO Cell Batch and Fed-Batch Cultures on Different Culture Media

A perspective‐driven and technical evaluation of machine learning in bioreactor scale‐up: A case‐study for potential model developments

A new strategy in bioreactor scale-up and process transfer using a dynamic initial vvm according to different aeration pore size

1H NMR-based Process Understanding and Biochemical Marker Identification Methodology for Monitoring CHO Cell Culture Process During Commercial-Scale Manufacturing

Process model comparison and transferability across bioreactor scales and modes of operation for a mammalian cell bioprocess

Modeling And Application Of Controlled-Fed Perfusion Culture Of Cho Cells In A Bioreactor

Hybrid modeling for in silico optimization of a dynamic perfusion cell culture process

Computational fluid dynamics simulation improves the design and characterization of a plug‐flow‐type scale‐down reactor for microbial cultivation processes

Scaling Fed-Batch and Perfusion Antibody Production Processes in Geometrically Dissimilar Stirred Bioreactors

Model uncertainty-based evaluation of process strategies during scale-up of biopharmaceutical processes

Data-driven and physics informed modelling of Chinese Hamster Ovary cell bioreactors