Abstract:(TiB + La2O3)/Ti composites with different initial structures were obtained through designed heat treatment. The isothermal deformation and spheroidization mechanisms of (TiB + La2O3)/Ti composites with different initial structures were investigated. Initial structures were refined as the heat treatment temperature decreased. Simultaneously, the quenching and reheating resulted in finer alpha lamella colonies and a interlamellar spacing compared to the furnace cooling. The flow resistance of furnace cooled samples was lower than the quenched and reheated samples in terms of flow stress data. Following the deformation at 920 degrees C, the furnace cooled samples demonstrated lamellar a phase and partial spheroidized structure. Moreover, the spheroidization mechanism was similar to the boundary splitting model. Recrystallized grains of approximately 1 mu m in diameter were obtained in the quenched and reheated sample following deformation at 920 degrees C. The spheroidization mechanism was attributed to the development of finer needles through quenching and reheating, as well as to subsequent dynamic recrystallization during the hot deformation. Additionally, the dislocation movement was blocked by the reinforcements on account of the composites with micron TiB and submicron La2O3 during the hot deformation. Furthermore, the reinforcements could facilitate the dynamic recrystallization (DRX) of the a phase.

Isothermal Deformation and Spheroidization Mechanism of (tib + La2O3)/Ti Composites with Different Initial Structures