Abstract:Due to widespread global mercury pollution via anthropogenic activities such as coal combustion and its severe toxicity even at low concentrations, it is necessary to remove mercury from power plant flue gas to protect both humans and the ecosystem. Currently, significant efforts are being made to maximize Hg-0 adsorption rates while minimizing the impact on the cost of electricity. The purpose of this study is to explore the influence of different sulfur forms on vapor Hg-0 removal by SO2-impregnated porous carbons. After SO2 impregnation, reductive heat treatment in N-2 and H2O2 oxidation process was used to diverge the sulfur form composition in porous carbons. The ultimate and X-ray photoelectron spectroscopy analysis were used to verify the sulfur species. The pore structures of sorbents were determined by nitrogen adsorption/desorption measurements. Then, their mercury removal performance was investigated in a fixed-bed reactor and the influence of different sulfur forms on equilibrium mercury adsorption capacity and mercury desorption was studied. Finally, the kinetics of mercury adsorption on SO2-impregnated sorbents was explored to identify whether the adsorption process is controlled by chemical adsorption. The results showed that apparent increases in the quantities of reduced sulfur species were observed after heat treatment, which is assumed to be beneficial for mercury adsorption. H2O2 oxidation after SO2 impregnation has caused a loss of reduced and nonoxidized sulfur forms in porous carbons, as well as an increase in insoluble oxidized sulfur species. One interesting finding is that even though the micropore volumes of porous carbons decreased after heat treatment, the Hg-0 adsorption capacities of reduced samples and the thermal stability of adsorbed mercury were both positively raised. After H2O2 treatment, the oxidized SO2 impregnated samples showed an obvious decrease in Hg-0 adsorption capacity. Compared with nonoxidized and oxidized sulfur forms, the reduced sulfur forms have shown a rather significant correlation with the mercury adsorption performance of SO2-impregnated samples. Kinetic analysis illustrates that mercury adsorption on SO2 impregnated porous carbons was mainly controlled by chemical adsorption.

Effects of SO2 on Hg Adsorption by Activated Carbon in O-2/CO2 Conditions. Part 1: Experimental and Kinetic Study

Influence of Flue Gas Components on the Mercury Adsorption/oxidation by Mechanochemical S2Cl2-modified Sawdust Coke

Effects of Coal-Fired Flue Gas Components on Mercury Removal by the Mechanochemical S-Modified Petroleum Coke

Synergistic Effect Between H2O and SO2 on Mercury Removal by Activated Carbon in O-2/CO2 Conditions

Mercury Removal Mechanism of Mechanochemical Sulfur Modified Straw Coke: Density Functional Theory Calculation and Kinetic Fitting

Effect of SO2 on Mercury Binding on Carbonaceous Surfaces

Effects of SO2and O2on Hg0removal capacity of sulfur modified petrol coke adsorbents

Effects of CO and CO2 on the Removal of Elemental Mercury over Carbonaceous Surfaces

Effect of atmosphere of SO2 coexisted with oxidizing gas on mercury removal under oxy-fuel condition

Studies on Mercury Adsorption Species and Desorption Activation Energy on Activated Carbon under Oxy Combustion

An Experimental Study on Coal-Char Sorbents for Gas-Phase Mercury Removal from Flue Gas

Influence of Different Sulfur Forms on Gas-Phase Mercury Removal by SO2-Impregnated Porous Carbons

Effect mechanism of SO2 on Hg0 adsorption over CuMn2O4 sorbent

Impact of SO2 and H2O on Mercury Removal by Activated Carbon in Simulated Flue Gas of Oxy-coal Combustion

Activated Carbon for Capturing Hg in Flue Gas under O-2/CO2 Combustion Conditions. Part 1: Experimental and Kinetic Study

Detrimental Effects of SO2 on Gaseous Mercury(ii) Adsorption and Retention by CaO-based Sorbent Traps: Competition and Heterogeneous Reduction.

Formation of Sulfur Oxide Groups by SO 2 and Their Roles in Mercury Adsorption on Carbon-Based Materials

Experimental Study on Mercury Removal and Regeneration of SO2 Modified Activated Carbon

Effects of Acidic Gases on Mercury Adsorption by Activated Carbon in Simulated Oxy-Fuel Combustion Flue Gas

Research on Vapor Mercury Adsorption by Ca-Based Sorbents

Effect of Powder Activated Carbon Circulation Rate on SO2 Adsorption