Abstract:The three-dimensional (3D) sculpturing of glass remains a significant challenge owing to its inherent hard and brittle nature. We develop a novel dynamic multi-focus laser sculpting (DMLS) method tailored for 3D glass fabrication. This method employs two-dimensional (2D) spatial multi-focus beams to form sectional profiles of 3D structures, which are modulated by superimposing the phase of Fresnel lenses and blazed gratings. With dynamic switching of phase diagrams on a spatial light modulator, the multi-focus beam rotates and creates a customized 3D laser-modified region inside the bulk glass. Following chemical etching helps remove the modified zones, forming ultimate 3D morphology on glass surface. The feasibility of this method hinges upon achieving uniform foci energy and narrow spatial foci intervals, essential for the precise removal of modified regions through connected crack channels during etching. We propose an extracting strategy to separate foci with random sequences into several groups to disrupt the periodicity of foci, thereby effectively weakening the unexpected Moiré fringes on the phase diagrams. This strategy enables the forming of dense foci by a single diagram with high uniformity, shortening the interval between foci. Further, for the lower surface roughness and higher precision of 3D structures, optimization of fabrication parameters is applied by experimental and numerical analysis. With the above optimization, the DMLS method is capable of carving diversified 3D glass structures, including hemispheres, cones, pyramids, semi-ellipsoids, and petal-like structures. Our method exhibits considerable versatility in processible structures with shape deviation lower than 1.9 μm, showing substantial potential in glass processing.

Dynamic Optics for 3D Laser Material Processing

Adaptive optics in laser processing

Spatial Light Modulation for Femtosecond Laser Manufacturing: Current Developments and Challenges

Laser-Induced Cavitation-Assisted True 3D Nano-Sculpturing of Hard Materials

Theoretical simulation and experimental verification of dynamic caustic manipulation using a deformable mirror for laser material processing

Advanced 3D micromachining techniques using UV laser sources

Efficient and Controllable Preparation of Tridirectionally Anisotropic Sliding Surfaces Based on Spatial Light Modulator

Dynamic Metrology and Data Processing for Precision Freeform Optics Fabrication and Testing

Femtosecond Multi-Beam Interference Lithography Based on Dynamic Wavefront Engineering

Dynamic multi-focus laser sculpting of freeform 3D glass microstructures

Nonreciprocal Optical Manipulation Using Dynamic Modulation

Dynamic MEMS-based optical metasurfaces

Ultra-fast 3D Printing of Assembly-Free Complex Optics with Sub-Nanometer Surface Quality at Mesoscale

Additive manufacturing of solid diffractive optical elements via near index matching

3D printing of optical materials: an investigation of the microscopic properties

Parallel Direct Laser Writing of Micro-Optical and Photonic Structures Using Spatial Light Modulator

Beam shaping for ultrafast materials processing

Three-Dimensional Optothermal Manipulation of Light-Absorbing Particles in Phase-Change Gel Media

Pulse Front Adaptive Optics: a New Method for Control of Ultrashort Laser Pulses

Ultrafast Bessel beams; advanced tools for laser materials processing

Laser Micro-Fabrication/Manipulation of Dielectric Materials