Abstract:Presented in this study is investigation of dynamic behavior of a helical gear reduction by experimental and numerical methods. A closed-loop test rig is designed to measure vibrations of the example system, and the basic principle as well as relevant signal processing method is introduced. A hybrid user-defined element model is established to predict relative vibration acceleration at the gear mesh in a direction normal to contact surfaces. The other two numerical models are also constructed by lumped mass method and contact FEM to compare with the previous model in terms of dynamic responses of the system. First, the experiment data demonstrate that the loaded transmission error calculated by LTCA method is generally acceptable and that the assumption ignoring the tooth backlash is valid under the conditions of large loads. Second, under the common operating conditions, the system vibrations obtained by the experimental and numerical methods primarily occur at the first fourth-order meshing frequencies and that the maximum vibration amplitude, for each method, appears on the fourth-order meshing frequency. Moreover, root-mean-square (RMS) value of the acceleration increases with the increasing loads. Finally, according to the comparison of the simulation results, the variation tendencies of the RMS value along with input rotational speed agree well and that the frequencies where the resonances occur keep coincident generally. With summaries of merit and demerit, application of each numerical method is suggested for dynamic analysis of cylindrical gear system, which aids designers for desirable dynamic behavior of the system and better solutions to engineering problems.

Mathematical Models and Dynamic Contact Analysis of Involute/Noninvolute Beveloid Gears

Parametric modeling and contact analysis of helical gears with modifications

Meshing Theory and Simulation of Noninvolute Beveloid Gears

Mathematic model and tooth contact analysis of a new spiral non-circular bevel gear

Research on Meshing Theory of Noninvolute Beveloid Gears

Parametric design of straight bevel gears based on a new tooth contact analysis model

A MATHEMATICAL MODEL FOR ANALYZING THE INFLUENCE OF SHAPE DEVIATIONS AND MOUNTING ERRORS ON GEAR DYNAMIC BEHAVIOUR

Meshing Theory And Simulation Of Noninvolute Beveloid Gears With Crossed Axes

New method for strength analysis of involute beveloid gears using fractal theory

A General Mathematical Model for Two-Parameter Generating Machining of Involute Cylindrical Gears

Dynamic analysis of a helical gear reduction by experimental and numerical methods

Theoretical and Experimental Study on Contact Characteristics of Spiral Bevel Gears under Quasi-Static and Large Loading Conditions

Hybrid Dynamic Modeling and Analysis of High-Speed Thin-Rimmed Gears

Contact dynamics analysis of nutation drive with double circular-arc spiral bevel gear based on mathematical modeling and numerical simulation

Optimization of the Loaded Contact Pattern of Spiral Bevel and Hypoid Gears Based on a Kriging Model

Angular velocity and contact force simulation of the spiral bevel gear meshing based on the hertz contact theory

Geometric parameter design and contact characteristics of beveloid gear and involute cylindrical gear transmission with crossed axes

Computerized Design and Analysis of Face-Milled, Uniform Tooth Height Spiral Bevel Gear Drives

An Efficient Three-Dimensional Dynamic Contact Model for Cylindrical Gear Pairs with Distributed Tooth Flank Errors

Dynamic analysis of gear pairs considering the actual contact state of truncated asperities on the 3D rough surfaces and force-dependent mesh stiffness

Dynamic Analysis of Helical Gears with Sliding Friction and Gear Errors