Abstract:The slow-cooling treatment has been observed to induce the formation of serrated grain boundaries, which effectively enhance the creep strength of nickel-based powder superalloys. However, this heat treatment also leads to the coarsening of γ′ precipitates in nickel-based alloys, which impairs their dispersion-strengthening effects. To address this issue, the high-temperature pre-precipitation treatment (HTPT) was employed to simultaneously form fine γ′ precipitates and serrated grain boundaries in the alloys. A systematic investigation was conducted to analyze the impact of various HTPT intermediate temperatures (ranging from 1150 to 1110 °C) on the microstructure and mechanical properties of the superalloy. In this study, a significant increase in the volume fraction of secondary γ′ with a butterfly-shaped morphology, from 1.6% to 27.7%, was observed as the intermediate temperature was decreased from 1150 to 1110 °C. Simultaneously, the average size of spherical tertiary γ′ precipitates decreased from 73.3 nm to 52.7 nm. Serrated grain boundaries were observed in the samples when the HTPT temperature was below 1140 °C, with increasing amplitudes ranging from 2.1 to 2.8 μm. To investigate the formation mechanism of these serrated grain boundaries, we focused on the interactions between γ′ precipitates and grain boundaries. At temperatures below 1135 °C, a fan-shaped structure consisting of finger-shaped γ′ dendrites and γ phases was observed, which potentially contributes to the formation of serrated grain boundaries. Among the samples tested, the sample subjected to an HTPT temperature of 1130 °C showed the best mechanical properties at room temperature (1542 MPa, 12.9% elongation), while the 1140 °C sample exhibited superior performance at 750 °C (1301 MPa, 6.5% elongation). These findings highlight the potential of heat treatment as a novel approach for enhancing the mechanical characteristics of nickel-based superalloys.

Effect of hafnium on annealing twin formation in as-hot isostatically pressed nickel-based powder metallurgy superalloy

Effect of hafnium addition on solidifi cation structure of cast Ti-46Al alloys

Effect of Hafnium Content on the Microstructural Evolution and Stress Rupture Properties of K4750 Nickel-Based Superalloy

The Effect of Hf on the Microstructure, Transformation Behaviors and the Mechanical Properties of Ti-Ni-Cu Shape Memory Alloys

Effect of HfC addition on the microstructure and properties of W–4.9Ni–2.1Fe heavy alloys

Impact of Hf Content on the Microstructure and Mechanical Properties of Bulk NiCoCrAlYMoHf Alloys

Effects Of Minor Hf On High Temperature Stress Rupture Properties Of High Angle Grain Boundary In A Re-Containing Ni-Based Bicrystal Superalloy

The influence of hafnium on high-magnesium alloys doped with transition metals during heat treatment

Effects of Hf additions on high-temperature mechanical properties of a directionally solidified NiAl/Cr(Mo) eutectic alloy

Effect of the Powder Size Distribution on the Hot Deformation Behavior of a Novel Nickel-based Powder Metallurgy Superalloy

Thermal processing behaviour and microstructural evolution of high W and high γ' content extruded nickel-based powder metallurgy superalloy FGH4109

Effect of γ' phase and microtwins on the microstructural evolution and mechanical properties of a novel Ni–Co base superalloy

Microstructure Characteristics and Mechanical Properties of NiAl/Cr(Hf, Ho) in Situ Composite

Study on mechanical alloying behavior and thermal stability of HfMoNbTaTi refractory high-entropy alloy

Research on Microstructure, Mechanical Properties, and High-Temperature Stability of Hot-Rolled Tungsten Hafnium Alloy

Effects of pre-precipitation treatment temperature on the microstructure and mechanical properties of nickel-based powder superalloy

FACTORS INFLUENCED INCIPIENT MELTING IN Hf-BEARING DS Ni-BASE SUPERALLOYS

The Effect of Hafnium Content on the Transformation Temperatures of Ni49Ti51-xHfx. Shape Memory Alloys

Effect of Ti and Al on Microstructure and Partitioning Behavior of Alloying Elements in Ni-based Powder Metallurgy Superalloys

Coupling Effects of Hafnium and Boron Additions on Solidification Structure Evolution in Ti46Al Alloy

Effect of Hf addition on microstructural evolution and corrosion behavior of nickel-based alloys in hydrochloric acid