Fatigue Performance Research of Headed Studs in Steel and Ultra-high Performance Concrete Composite Deck
Cheng LIU,Jian-sheng FAN,Jian-guo NIE,Jian-hua HU,Jian-feng CUI,Liang TANG
DOI: https://doi.org/10.3969/j.issn.1006-3897.2017.03.015
2017-01-01
Abstract:Aimed at the paucity of research on the fatigue performance of headed stud connector in the steel and ultra-high performance concrete (UHPC) composite deck,by numerical simulation and fatigue experiments,the fatigue performance of headed stud connector in the steel-UHPC composite deck in Dongting Bridge in Yueyang was investigated.In numerical simulation,the multi-scale finite element model (FEM) was first established,the influence surface of the headed stud was then obtained,and the equivalent fatigue shear stress was obtained based on the standard fatigue vehicle in Chinese specifications for design of highway steel bridge.In fatigue experiments,two fatigue specimens were designed taking the plate strip of the composite deck in areas of sagging and hogging moment respectively.The specimens were loaded for 2 million cycles under nominal shear stress of 119.5 MPa and 72.0 MPa.The equivalent fatigue shear stress range was modified due to the size of influence surface,the traffic flow and the design period,and the fatigue lifetime of the headed stud was evaluated.The results show that after loading for 2 million cycles,the specimens are in plain section and there is no obvious bonding failure phenomenon.Hence the fatigue strengths of the headed stud in sagging and hogging moment are safely taken as 119.5 MPa and 72.0 MPa respectively.The stud connector in composite deck of Dongting Bridge satisfies a design lifetime requirements of 120 years with enough safety margin.