Abstract:In state-of-the-art lithium ion batteries, separators (microporous membranes) play a passive yet critical role – hosting liquid electrolyte and maintaining physical separation of the electrodes. However, as the demands on lithium ion batteries increase, with an emphasis on greater energy density, longevity (cycle/calendar life), and safety, engineering separators to take a on more active role in the cell (electro)chemistry is expected to be an important strategy. Myriad membrane materials and separator designs have been developed to impart additional functionality, for example, acid and/or transition metal scavenging, temperature responsiveness, enhanced thermal stability, increased ion dissociation, combustion suppression, and mechanical strength. In this talk, I will preset my group's approach to additive manufacturing of next-generation lithium ion battery separators. Our approach is based on polymerization induced phase separation (PIPS), wherein polymerizable monomers (or prepolymer resins) are mixed with porogen. Through rapid, low-cost, readily scalable photopolymerization, the monomers are converted to a crosslinked polymer network, which results in the porogen becoming immiscible and phase separating through spinodal decomposition. By tuning the thermodynamics of the polymer-porogen mixture and photopolymerization kinetics, the porosity and pore size of the resulting polymeric phase can be tuned. We have shown that ethylene carbonate (EC) mixed with common acrylate monomers, such as 1,4-butanediol diacrylate, is an effective porogen. Most importantly because EC is an indispensable component in liquid electrolytes, it does not need to be extracted from the separator prior to incorporation into the electrochemical cell. By controlling the ratio of the 1,4-butanediol diacrylate (BDDA) monomer to EC, monolithic microporous membranes are readily prepared with 25 μm thickness and pore sizes and porosities ranging from 6.8 to 22nm and 15.4% to 38.54%, respectively. The optimal poly(1,4-butanediol diacrylate) (pBDDA) separator has a porosity of 38.5% and average pore size of 22 nm; uptakes 127% liquid electrolyte by mass, and has an ionic conductivity of 1.98 mS/cm, which is higher than that of Celgard 2500. Lithium ion battery half cells consisting of LiNi 0.5 Mn 0.3 Co 0.2 O 2 cathodes and pBDDA separators were shown to undergo reversible charge/discharge cycling with an average discharge capacity of 142 mAh/g and a capacity retention of 98.4% over 100 cycles - comparable to cells using state-of-the-art separators. Furthermore, the pBDDA separators were shown to be thermally stable to 400°C, lack low temperature thermal transitions that can compromise cell safety, and exhibits no thermal shrinkage up to 150°C. I will also discuss my group's efforts to engineer separators with additional functionality to improve cell performance under abuse conditions.

A Phase Separation Method Toward Ppta-Polypropylene Nanocomposite Separator For Safe Lithium Ion Batteries

High Thermal Resistance Polyimide Separators Prepared Via Soluble Precusor and Non-Solvent Induced Phase Separation Process for Lithium Ion Batteries

Polypropylene Separator Coated with a Thin Layer of Poly(lithium Acrylate‐co‐butyl Acrylate) for High‐performance Lithium‐ion Batteries

Copolymer-assisted Polypropylene Separator for Fast and Uniform Lithium Ion Transport in Lithium-ion Batteries

Novel Configuration of Polyimide Matrix-Enhanced Cross-Linked Gel Separator for High Performance Lithium Ion Batteries

Poly(m-phenylene isophthalamide) separator for improving the heat resistance and power density of lithium-ion batteries

Recent Progress of Poly (P-Phenylene Terephthalamide) Separator for Lithium Ion Battery

Fabrication of Diatomite/polyethylene Terephthalate Composite Separator for Lithium-Ion Battery

(Invited) Multifunctional Lithium Ion Battery Separators through Polymerization-Induced Phase Separation

Polyphenols Assisted Silica Coating on Polypropylene Separators with Improved Wettability and Heat‐resistance for Lithium‐ion Batteries

Effect of thermal processing conditions on the structure and properties of porous PENK/PVDF composite films and its application as lithium-ions separators

Improving the wettability and thermal resistance of polypropylene separators with a thin inorganic–organic hybrid layer stabilized by polydopamine for lithium ion batteries

Porous, Robust, Thermal Stable, and Flame Retardant Nanocellu-lose/Polyimide Separators for Safe Lithium-Ion Batteries

Effect of Silica Nanoparticles/Poly(Vinylidene Fluoride-Hexafluoropropylene) Coated Layers on the Performance of Polypropylene Separator for Lithium-Ion Batteries

Organic phase change composite separators to enhance the safety performance of lithium-ion batteries

Enhanced Wettability and Thermal Stability of Polypropylene Separators by Organic–inorganic Coating Layer for Lithium‐ion Batteries

In situ covalent crosslinking strategy to construct highly stable composite separators for lithium-ion batteries

Binder‐Free TiO 2 ‐coated Polypropylene Separators for Advanced Lithium‐Ion Batteries

High Thermal Stability and Low Impedance Polypropylene Separator Coated with Aluminum Phosphate

Facile preparation of surface-modified polypropylene nanofiber separators with enhanced ionic transport and welding performance for lithium-ion batteries

Natural halloysite nanotubes-coated polypropylene membrane as dual-function separator for highly safe Li-ion batteries with improved cycling and thermal stability