Abstract:The issue of determining the stress-strain state during creep in models of rotors of steam and gas turbines is considered. The formulation of the problem is based on the general approach of Solid Mechanics using incremental theory to describe creep strains. The Finite Element Method was used as a solution method in the implementation of professional engineering software. The influence of the centrifugal forces on the stress-strain state, which varies during 10,000 hours of creep of the rotor material, is analyzed. Two models of the rotor are considered: a simplified cylindrical and a drum-type rotor, which is described by the geometry of the body of revolution and which consists of several cylindrical parts. Due to the symmetry of the models, the calculation schemes are built on the basis of the use of a two-dimensional finite element of the body of revolution. Algorithms are applied for the preparation of input data can be recommended for use in the design practice of energy industry enterprises. The Norton law was used for creep calculations. The creep of the models in different temperature conditions with the use of various steels used in turbo-building as their material was analyzed. According to the results of the performed computer simulation of the creep of rotor models, the levels of deformation and the nature of the redistribution of stresses that occur under the same load by centrifugal forces in different temperature conditions caused by the operational processes in the turbine have been established. The stress and strain levels in the drum-type rotor were analyzed and the most loaded and deformed areas of it were determined. It is noted that according to the simulation data for the considered model of the drum-type rotor, the level of accumulated strains, is moderate and does not exceed 0.4%, which is suitable from the point of view of the analysis of operational properties.

Modeling the Creep Damage Effect on the Creep Crack Growth Behavior of Rotor Steel

A Hybrid Modeling Method of Fatigue Crack Growth for Gas Turbine Blades under Combined High and Low Cycle Fatigue Loadings

Study on Creep Behavior and Fracture Life Prediction Method of P92 Steel Based on Finite Element Analysis

Fatigue Crack Propagation Analysis in an Aero-Engine Turbine Disc Using Computational Methods and Spin Test

Constitutive Model Based Efficient Creep-Fatigue Damage Computation Technique for Steam Turbine Rotors to Enhance Flexible Operational Capabilities

Patterns of Transverse Crack Growth in a Steam Turbine Rotor Model Under Dynamic Loading

Microstructural Damage Mechanics-Based Model for Creep Fracture of 9%cr Steel under Prior Fatigue Loading

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

Creep analysis and service life prediction of turbine blade with progressive damage

Assessment of prior fatigue damage and a new approach to predict remanent creep rupture of P92 steel

A Modified Microstructure-Based Creep Damage Model for Considering Prior Low Cycle Fatigue Damage Effects

A New Empirical Life Prediction Model For 9-12%Cr Steels Under Low Cycle Fatigue And Creep Fatigue Interaction Loadings

Estimation of Fatigue Crack Growth at Transverse Vibrations of a Steam Turbine Shaft

Creep life prediction for a nickel-based single crystal turbine blade

A life prediction method and damage assessment for creep-fatigue combined with high-low cyclic loading

Experimental and Simulated Characterization of Creep Behavior of P92 Steel with Prior Cyclic Loading Damage

Creep crack growth prediction using a damage based approach

Computer simulation of a rotor creep

A Creep Constitutive Model, Based on Deformation Mechanisms and Its Application to Creep Crack Growth

The Relative Significance of Internal Damage Mechanisms on the Overall Creep Damage and Ultimate Failure of P91 Steel

Numerical Simulation of Creep Damage and Life Prediction of Superalloy Turbine Blade