Abstract:Optimization of forming process of fabric reinforced composites requires a multifaceted characterization of the reinforcement material and its implementation in customized simulations. This manuscript investigates the effect of inclusion of ‘shear-tension coupling’ (interaction) in woven fabric models on the ensuing predictions of forming simulations. To this end, a constitutive model estimating the shear stiffness as a function of axial tension along warp and weft in a typical glass plain weave has been selected. The model was implemented into the Abaqus numerical package using a customized fabric element, capable of simulating the non-orthogonal behaviour of the fabric as well as its tension-shear interaction. Subsequently, the model was employed for studying forming processes with three different punch geometries including hemisphere, double-dome, and tetrahedral shapes. In each case, comparisons were made between the model with the effect of shear-tension interaction and the conventional model assuming the shear stiffness is merely a function of shear angle (i.e., with no interaction). Results revealed that although the conventional models could be acceptable in predicting the general shear deformation pattern of the fabric (in particular in the presence of sufficient blank holder forces), the forming models that included the shear-tension interaction had lower formation of local wrinkles as well as notably higher residual stresses in all simulation cases, especially in critical sharp corners of the part and the fabric free regions.

Shear Behavior of Architectural Coated Fabrics under Biaxial Bias-Extension

Mechanical properties analysis of architectural PVDF/PES fabrics with uni-tensile and bi-axial test

Experiments on the mechanical properties and the welded seam properties of architectural membranes

Bi-axial tensile test method and analytical algorithm of elastic constants for the airship envelope fabric

Experimental studies on tear failure of PVC coated fabric

Effect of Tackification on In-Plane Shear Behaviours of Biaxial Woven Fabrics in Bias Extension Test: Experiments and Finite Element Modeling

Advances in mechanical properties of coated fabrics in civil engineering

Characterization of Shear Behavior in Stainless Steel Wire Mesh Using Bias-Extension and Picture Frame Tests

Identification of Shear Properties for Woven Fiber Reinforced Polymer Simulation

Finite Element Modelling for Tensile Behaviour of Thermally Bonded Nonwoven Fabric

Shear deformation characteristics under tensile stress during forming of tubular braided fabrics

Quasi-static puncture resistance behaviors of architectural coated fabric

Study on the shear-pretension coupling behavior of 3D uniform and variable thickness woven fabrics

Effects of fabric architectures on mechanical and damage behaviors in carbon/epoxy woven composites under multiaxial stress states

Measurement of meso-scale shear deformations for modelling textile composites

Anisotropic Mechanical Response and Strain Localization of a Metallic Glassy-Fiber-Reinforced Polyethylene Terephthalate Fabric

Comparative studies on the effect of fabric structure on mechanical properties of carbon fiber/epoxy composites

Experimental investigation on the effects of fabric architectures on mechanical and damage behaviors of carbon/epoxy woven composites

Response Characteristics of Elastic Parameters of Woven Fabrics in Stress Space and a Nonlinear Constitutive Analysis

On effect of shear-tension coupling in forming simulation of woven fabric reinforcements

A simplified constitutive and finite element model of plain weave fabric reinforcements for the biaxial loading