A zero‐input‐current‐ripple high‐voltage‐gain DC‐DC converter with integrated Y‐source network
Mingzhu Zhou,Chao Liu,Xiaoying Chen,Xingkui Mao,Yiming Zhang
DOI: https://doi.org/10.1002/cta.4016
IF: 2.378
2024-03-16
International Journal of Circuit Theory and Applications
Abstract:This paper proposes a zero‐input‐current‐ripple (ZICR) high‐voltage‐gain dc‐dc converter with an integrated Y‐source network. It achieves zero input current ripple by introducing a parallel branch of an extra inductor, a coupled winding, and a capacitor at the input port. The voltage of the added inductor is opposite to that of the coupled winding. By adding the Y‐source coupled inductor, the boost capability of the converter is improved. The unique boost circuit structure makes that one winding in the three‐winding coupling inductance is step‐down type (the turns ratio n2 1). In such a case, high voltage gain can be obtained under a lower turn ratio of the coupled inductor. The inherent passive clamping circuit clamps the spike voltage noises of the main switch to a low level and improves the efficiency. All the diodes have achieved ZCS (zero current switching) turn‐off. By comparing with several new converters, the advantages of this converter are proved. Finally, a 200‐W, 48‐ to 380‐V, 50‐kHz experimental prototype is built based on the theoretical research. At the rated power, the measured efficiencies with and without ZICR are 95.2% and 95.6%, respectively. Summary This paper proposes a zero‐input‐current‐ripple (ZICR) high‐voltage‐gain dc‐dc converter with an integrated Y‐source network. It achieves zero input current ripple by introducing a parallel branch of an extra inductor, a coupled winding, and a capacitor at the input port. The voltage of the added inductor is opposite to that of the coupled winding. By adding the Y‐source coupled inductor, the boost capability of the converter is improved. The unique boost circuit structure makes that one winding in the three‐winding coupling inductance is step‐down type (the turns ratio n2 1). In such a case, high voltage gain can be obtained under a lower turn ratio of the coupled inductor. The inherent passive clamping circuit clamps the spike voltage noises of the main switch to a low level and improves the efficiency. All the diodes have achieved ZCS (zero current switching) turn‐off. By comparing with several new converters, the advantages of this converter are proved. Finally, a 200‐W, 48‐ to 380‐V, 50‐kHz experimental prototype is built based on the theoretical research. At the rated power, the measured efficiencies with and without ZICR are 95.2% and 95.6%, respectively.
engineering, electrical & electronic