Abstract:In this paper, a new type of nitrogen-doped carbon fiber/molybdenum disulfide (N-CFs/MoS2) hybrid electrode materials are prepared via a certain concentration in solvothermal synthesis followed by a high-temperature carbonization process and using the carboxymethylcellulose ammonium (CMC-NH4) as a structure-directing agent for MoS2 nanosheet growth during the solvothermal synthesis process. The addition of CMC-NH4 effectively prevents the agglomeration of MoS2 nanosheets to increase the specific surface area. Moreover, it not only serves as a carbon source to provide conductive pathways, but also introducesN atoms to improve the conductivity of the CFs and promote the transfer of electrons and ions. This ultimately increases the conductivity of the electrode materials. Thus, the as-prepared N-CFs/MoS2 hybrids exhibit excellent electrochemical performance. The specific capacitance is up to 572.6 F g(-1) under a current density of 0.75 A g(-1) and the specific capacitance retained 98% of the initial capacitance after 5000 cycles of charge-discharge tests at a current density of 2.5 A g(-1). Moreover, the hybrids show a maximum energy density of 19.5 W h kg(-1) at a power density of 94 W kg(-1). Therefore, the as-prepared N-CFs/MoS2 hybrids with remarkable electrochemical properties, low cost and environment protection show potential for practical application in the development of high-performance electrochemical energy storage devices.

Carboxymethylcellulose Ammonium-Derived Nitrogen-Doped Carbon Fiber/molybdenum Disulfide Hybrids for High-Performance Supercapacitor Electrodes

Design of MoS2/NC/MnO2 hollow microsphere electrode for high performance supercapacitors

Highly Conductive Mo2C Nanofibers Encapsulated in Ultrathin MnO2 Nanosheets As a Self-Supported Electrode for High-Performance Capacitive Energy Storage.

Porous Hybrid Composites of Few-Layer MoS2 Nanosheets Embedded in a Carbon Matrix with an Excellent Supercapacitor Electrode Performance.

Fabrication of Hybrid CoMoO4–NiMoO4 Nanosheets by Chitosan Hydrogel Assisted Calcinations Method with High Electrochemical Performance

Mixed-Metallic Mof Based Electrode Materials For High Performance Hybrid Supercapacitors

Mixed Nickel-Cobalt-Molybdenum Metal Oxide Nanosheet Arrays For Hybrid Supercapacitor Applications

Dopamine Adsorption Precursor Enables N-doped Carbon Sheathing of MoS2 Nanoflowers for All-around Enhancement of Supercapacitor Performance

Kelp-like Structured NiCo2S4-C-MoS2 Composite Electrodes for High Performance Supercapacitor

In Situ Construction of Carbon Nanotubes/nitrogen-Doped Carbon Polyhedra Hybrids for Supercapacitors

Preparation of MoFs-Derived Cobalt Oxide/Carbon Nanotubes Composites for High-Performance Asymmetric Supercapacitor

Na+ Intercalated Manganese Dioxide/MOF-Derived Nanoporous Carbon Hybrid Electrodes for Supercapacitors with High Rate Performance and Cyclic Stability

MOF-Derived Nickel–Cobalt Sulfide Nanoflakes Wrapped Carbon Nanotubes for Hybrid Supercapacitors

A 2D Metal–organic Framework/reduced Graphene Oxide Heterostructure for Supercapacitor Application

Self-assembled Mo doped Ni-MOF nanosheets based electrode material for high performance battery-supercapacitor hybrid device

One-step Synthesis of MnS/MoS2/C Through the Calcination and Sulfurization of a Bi-Metal-organic Framework for a High-Performance Supercapacitor and Its Photocurrent Investigation.

Nitrogen-doped reduced graphene oxide/MoS<sub>2</sub> 'nanoflower' composites for high-performance supercapacitors

Nitrogen-doped hollow carbon polyhedron derived from metal-organic frameworks for supercapacitors

Hydrothermal synthesis of MWCNT/Ni-Mn-S composite derived from bimetallic MOF for high-performance electrochemical energy storage

Impact of Nitrogen-Enriched 1T/2H-MoS2/CdS as an Electrode Material for Hybrid Supercapacitor

A novel MOF-derived binary metal oxides and carbon nanocomposite for high-performance symmetric supercapacitor application