Abstract:Purpose The purpose of this study is to investigate the influence of surface texture on the subsurface characteristics of contact interfaces under elastohydrodynamic lubrication condition. As a typical contact form of gears and bearings, the optimization of friction characteristics at the elastohydrodynamic lubrication (EHL) interface has attracted the attention of scholars. Laser surface texturing is a feasible optimization solution, but there have been concerns about whether the surface texture of high-pair parts will affect their fatigue life. Design/methodology/approach To examine the impact of texture preparation on the subsurface characteristics of high-pair interfaces under EHL conditions, a point contact EHL model is developed that takes into account the effect of textured surface topography. The pressure and thickness of the oil film are calculated as input parameters under different loads and entrainment velocities. The finite element method is used to simulate the impact of textures with varying diameters, densities and depths on the subsurface characteristics of the elastohydrodynamic interface. According to ISO 25178, analyze the relationship between 3D topography parameters and subsurface characteristics and study the trend of friction characteristics and subsurface characteristics based on the results of the ball on disc friction tests. Findings The outcomes suggest that under different rotational velocity and load conditions, the textured surfaces exhibit improved friction reduction effects; however, the creation of textures can result in significant subsurface plastic deformation and local peeling. The existence of texture makes the larger stress zone in the subsurface layer closer to the surface, leading to fatigue failure near the surface. Reasonable design parameters can help enhance the attributes of the subsurface. A smaller Sa and a Str greater than 0.5 can achieve ideal subsurface properties on the textured surface. Originality/value This paper investigates the influence of surface texture on the friction and subsurface characteristics of EHL interfaces and analyzes the impact of surface texture on interface contact performance while achieving lubrication improvement functional characteristics. The results provide theoretical support for the optimization design and functional regulation of surface texture in EHL interfaces. Peer review The peer review history for this article is https://publons.com/publon/10.1108/ILT-10-2023-0324/

Surface Texture Processing For Tribological Performance Improvement Of Uhmwpe-Based Water-Lubricated Bearings

Evaluation of tribological performance for laser textured surfaces with diverse wettabilities under water/oil lubrication environments

Experimental investigation for vibration reduction of surface-textured journal bearings

Tribological and Vibration Properties of Three Different Polymer Materials for Water-Lubricated Bearings

Tribological evaluation of thermoplastic polyurethane-based bearing materials under water lubrication: Effect of load, sliding speed, and temperature

Influence of micro-texture radial depth variations on the tribological and vibration characteristics of rolling bearings under starved lubrication

Study on the tribological performance of self-lubricating thrust ball bearings with different embedded features

Derivative Analysis and Evaluation of Roll-slip Fretting Wear Mechanism of Ultra-thin-walled Bearings under High Service

Study on Tribological Characteristics of Ultra-High Molecular Weight Polyethylene under Unsaturated Lubrication of Water and Brine

Influence of Variable-Depth Groove Texture on the Friction and Wear Performance of GCr15–SiC Friction Pairs Under Water Lubrication

Study on the subsurface characteristics of textured surfaces under EHL condition

Facile Fabrication and Tribological Properties of Self-Lubricating Polyurethane Based on Expanded Graphite/Paraffin for Water Lubricated Bearings

Tribological Performance of Self‐lubricating Polyurethane Elastomer Compounding with the Modified Ultra‐high Molecular Weight Polyethylene

Tribological and dynamic performance analysis of rolling bearings with varied surface textures operating under lubricant contamination

Preparation of Superhydrophobic 35CrMo Surface and Its Tribological Properties in Water Lubrication

Wedge-shaped lyophilic pattern on superlyophobic surface for unidirectional liquid guidance and lubrication enhancement

A Pocket-Textured Surface for Improving the Tribological Properties of Point Contact under Starved Lubrication

Efficiency of surface texturing in the reducing of wear for tests starting with initial point contact

Theoretical and experimental study on influences of surface texture on lubrication performance of a novel bearing

Numerical analysis of lubrication properties on a bio-inspired parabolic textured surface

Effects of Laser Surface Texturing and Lubrication on the Vibrational and Tribological Performance of Sliding Contact