Abstract:In this paper, a feedback control mechanism and its optimization for rotating disk vibration/flutter via changes of air-coupled pressure generated using piezoelectric patch actuators are studied. A thin disk rotates in an enclosure, which is equipped with a feedback control loop consisting of a micro-sensor, a signal processor, a power amplifier, and several piezoelectric (PZT) actuator patches distributed on the cover of the enclosure. The actuator patches are mounted on the inner or the outer surfaces of the enclosure to produce necessary control force required through the airflow around the disk. The control mechanism for rotating disk flutter using enclosure surfaces bonded with sensors and piezoelectric actuators is thoroughly studied through analytical simulations. The sensor output is used to determine the amount of input to the actuator for controlling the response of the disk in a closed loop configuration. The dynamic stability of the disk-enclosure system, together with the feedback control loop, is analyzed as a complex eigenvalue problem, which is solved using Galerkin’s discretization procedure. The results show that the disk flutter can be reduced effectively with proper configurations of the control gain and the phase shift through the actuations of PZT patches. The effectiveness of different feedback control methods in altering system characteristics and system response has been investigated. The control capability, in terms of control gain, phase shift, and especially the physical configuration of actuator patches, are also evaluated by calculating the complex eigenvalues and the maximum displacement produced by the actuators. To achieve a optimal control performance, sizes, positions and shapes of PZT patches used need to be optimized and such optimization has been achieved through numerical simulations.

A unified Gram-Schmidt-Ritz formulation for vibration and active flutter control analysis of honeycomb sandwich plate with general elastic support

Modeling and Vibration Control of Sandwich Composite Plates

Non-Uniform Control Moments Induced By A Skew-Quad Actuator Design Applied To Plate Controls

Response Adjustable Performance of a Visco-Elastomer Sandwich Plate with Harmonic Parameters and Distributed Supported Masses under Random Loading

Active Vibration Control of Piezoelectric Sandwich Plates

Nonlinear aeroelastic analysis and active flutter control of functionally graded piezoelectric material plate

Optimal Control Of Piezoelectric Laminated Parabolic Cylindrical Panels

Active Control of Honeycomb Sandwich Plate Using MFC Piezoelectric Actuators

Optimization of Sensing and Feedback Control for Vibration/Flutter of Rotating Disk by PZT Actuators Via Air Coupled Pressure

Test Research on Active Vibration Control of Honeycomb Plate

Adaptive Vibration Control of Flexible Plate Structures with Actuator Placement Optimization

Aeroelastic modeling and analysis of honeycomb plates in high-speed airflow with acoustic load and general boundary conditions

Robust Control of Plate Vibration Via Active Constrained Layer Damping

Size-dependent Free Vibration Analysis of Honeycomb Sandwich Microplates Integrated with Piezoelectric Actuators Based on the Modified Strain Gradient Theory

Finite element analysis of actively controlled smart plate with patched actuators and sensors

Finite Element Modeling and Vibration Control of Plates with Active Constrained Layer Damping Treatment

Dynamic analysis of sandwich conical shell with magneto/electro rheological core using a truly meshfree radial point interpolation method

Dynamic Characteristics and Active Control Experiment of Honeycomb Plates

The Active Control Of Vibration And Power Flow In The Crossing-Shaped Plate Structure

Experiments on Vibration Control of a Piezoelectric Laminated Paraboloidal Shell

Flutter analysis of supersonic moderately thick orthotropic plates resting on elastic supports