Abstract:Cascading fault is a newly emerging challenge in hybrid ac/dc grids including current source converters (CSCs) which commences from a dc or a long-lasting severe inverter ac fault and ultimately provokes a total blackout at the inverter ac side. Nevertheless, since the cascading faults emanating from dc faults are not accompanied by commutation failure, the prevailing commutation failure elimination strategies are unable to inhibit these contingencies. To obviate such a challenge, this paper proposes a coordinated power flow control strategy which can preclude the blackouts caused by cascading faults initiated from either dc or inverter ac faults, thereby improving the reliability of hybrid ac/dc power grids. To achieve this, a back-to-back voltage source converter (B2B-VSC) is employed which is responsible for controlling both the inverter ac bus voltage and the active power flow of its connected ac line. This would not only mitigate the probability of commutation failure due to the reinforced inverter ac bus voltage, but also enhance the power flow flexibility of the power grid during both normal and fault conditions. In addition, the cost associated with implementation of the proposed strategy is much less than installing several backup parallel lines which are useless under no-fault circumstances. Finally, the practical viability of the proposed strategy is scrutinized through laboratory testing using co-simulation of RTDS and Opal-RT simulators. The obtained results show that the developed strategy can effectively manage the power flow of B2B-VSC and CSC-HVDC systems during different possible fault cases so that the power outage at the inverter ac side is minimized.

Robust Voltage Control Strategy for Hybrid AC/DC Sending-Side Systems to Prevent Cascading Trip Failures

Coordinated Optimization of VSC-HVDC Controller Considering DC Line

Optimal Power Coordinated Control Strategy for DFIG-Based Wind Farm to Increase Transmission Capacity of the LCC-HVDC System Considering Commutation Failure

Control Strategy of Cascaded Multilevel Converter Based on Dual Active Bridge for Wind Energy Conversion System.

Overvoltage Suppression Strategy of LCC-HVDC Delivery System Based on Hydropower Phase Control Participation

Impedance Characteristic Analysis and Phase-locked Angle Feedforward-based Stability Improvement for LCC-HVDC in Sending AC Grid

Coordinated Optimization for Multi-Infeed LCC-HVDCs Transient Control Considering Short-Term Voltage Stability of Receiving-End Grid

Inverter Turn-off Angle Control Optimization of UHVDC with Hierarchical Connection to AC Grid

Optimal Power Distribution Method for Wind Farms to Enhance the FRT Capability of the LCC-HVDC System under Commutation Failure

Transient Stability Emergency Control for AC/DC Grids Considering Successive Commutation Failures

A Novel Control Strategy For Offshore Dfig-Based Wind Farm Integrated Through Diode-Rectifier-Based Hvdc Transmission

Coordinated reactive power control for hybrid cascaded high‐voltage direct‐current links in weak AC grids

A control strategy of converters based on constant extinction area for UHVDC system under hierarchical connection

An AC-DC Coordinated Scheme for Cascaded Hybrid High-Voltage Direct Current to Suppress Wind Power Fluctuations

A Voltage Control Strategy for Preventing Cascading Trips of Large-scale Wind Power in Centralized Area

Transient Voltage Control of Sending-End Wind Farm Using a Synchronous Condenser Under Commutation Failure of HVDC Transmission System

A Post-Contingency Power Flow Control Strategy for AC/DC Hybrid Power Grid Considering the Dynamic Electrothermal Effects of Transmission Lines.

Coordinate Control of Active and Reactive Power in Wind Integration Area to Prevent Cascading Trip Fault

Distributed Automatic Voltage Control Framework for Large-Scale Wind Integration in China

A Coordinated Power Flow Control Strategy to Enhance the Reliability of Hybrid Ac/dc Power Grids During Cascading Faults

Hierarchical Automatic Voltage Control for Integration of Large-Scale Wind Power: Design and Implementation