Abstract:This work describes the development of graphene oxide‐based nanocomposites functionalized with 3‐aminopropyltrimethoxysilane (GO‐APTMS) and 3‐mercaptopropyltrimehtoxysilane (GO‐MPTS), onto which silver nanoparticles (AgNPs) are grown. These nanocomposites are immobilized onto glassy carbon (GC) electrodes for electrochemical sensing of nitrite ions (NO2−) in various samples. The study involved thorough material characterization and demonstrated that the resulting modified electrodes (GC/GO‐APTMS/AgNPs and GC/GO‐MPTS/AgNPs) exhibited excellent electrocatalytic activity, displaying wide calibration ranges, low detection limits, high sensitivity, and stability for NO2− determination. Real sample analysis of tomato ketchup validate the sensors′ reliability in detecting nitrite levels in food samples, showcasing potential applications in environmental and food quality monitoring. Nitrite is a significant environmental pollutant present in industrial waste water, food additives, detergents, and physiological systems. Therefore, an effective electrochemical sensor is essential for nitrite determination. Accordingly in this work, graphene oxide (GO) is functionalized with 3‐aminopropyltrimethoxysilane (GO‐APTMS) and 3‐mercaptopropyltrimehtoxysilane (GO‐MPTS). Further, Silver nanoparticles (AgNPs) were grown on GO‐MPTS (GO‐MPTS/AgNPs) and GO‐APTMS (GO‐APTMS/AgNPs). GO‐APTMS/AgNPs and GO‐MPTS/AgNPs are characterized by different spectroscopic and microscopic techniques such as Fourier transform infrared (FT‐IR), UV‐vis and powder X‐ray diffraction(p‐XRD), transmission electron microscopy(TEM) with selected area electron diffraction (SAED) and energy dispersive X‐ray analysis (EDAX). The nanocomposites, GO‐APTMS/AgNPs and GO‐MPTS/AgNPs are immobilized on glassy carbon (GC) electrode and abbreviated as GC/GO‐APTMS/AgNPs and GC/GO‐MPTS/AgNPs, respectively. It exhibits excellent electrocatalytic activity toward the oxidation of NO2−. It shows the broad calibration range from 0.1 μM to 1 mM. The detection limit for NO2− is 90 nM and 80 nM for GC/GO‐APTMS/AgNPs and GC/GO‐MPTS/AgNPs, respectively. GC/GO‐APTMS/AgNPs and GC/GO‐MPTS/AgNPs exhibit sensitivity of 0.26 μA μM−1cm−2 and 0.46 μA μM−1 cm−2, respectively for NO2− determination. The modified electrode, GC/GO‐APTMS/AgNPs and GC/GO‐MPTS/AgNPs exhibit a wide calibration range, low detection limit, high sensitivity, selectivity, and stability for NO2− determination. Real sample analysis of tomato ketchup was performed at GC/GO‐APTMS/AgNPs and GC/GO‐MPTS/AgNPs with reliable recovery.

Temperature-controlled Ethanolamine and Ag-nanoparticle Dualfunctionalization of Graphene Oxide for Enhanced Electrochemical Nitrite Determination

Enhanced Electrocatalytic Nitrite Determination Using Poly(diallyldimethylammonium Chloride)-Coated Fe1.833(OH)0.5O2.5-decorated N-doped Graphene Ternary Hierarchical Nanocomposite

Electrochemical Nitrite Nanosensor Based On Au Nanoparticles/Graphene Nanocomposites

Monodispersed and Spherical Silver Nanoparticles/graphene Nanocomposites from Gamma-Ray Assisted In-Situ Synthesis for Nitrite Electrochemical Sensing

A sensitive and selective nitrite sensor based on a glassy carbon electrode modified with gold nanoparticles and sulfonated graphene

Amperometric determination of nitrite by using a nanocomposite prepared from gold nanoparticles, reduced graphene oxide and multi-walled carbon nanotubes

The Graphene/polypyrrole/chitosan-Modified Glassy Carbon Electrode for Electrochemical Nitrite Detection

Nitrite Electrochemical Biosensing Based on Coupled Graphene and Gold Nanoparticles

Nonenzymatic Amperometric Sensor for Nitrite Detection Based on a Nanocomposite Consisting of Nickel Hydroxide and Reduced Graphene Oxide

Efficient nitrite determination by electrochemical approach in liquid phase with ultrasonically prepared gold-nanoparticle-conjugated conducting polymer nanocomposites

A novel nitrite sensor based on graphene/polypyrrole/chitosan nanocomposite modified glassy carbon electrode.

In Situ Growth of Silver Nanoparticles on Graphene Oxide Towards Electrochemical Nitrite Detection

Selective and Sensitive Nitrite Sensor Based on Glassy Carbon Electrode Modified by Silver Nanochains

Detection of Nitrite in Water Using Glycine-modified Nanocarbon and Au Nanoparticles Co-Modified Flexible Laser-Induced Graphene Electrode

Rare Earth Oxide Dy2o3-Au Nanocomposite-Based Electrochemical Sensor for Sensitive Determination of Nitrite

Development of a novel nitrite electrochemical sensor by stepwise in situ formation of palladium and reduced graphene oxide nanocomposites

Electrocatalytical Oxidation of Nitrite and Its Determination Based on Au@Fe3o4 Nanoparticles

A Novel Highly Sensitive Electrochemical Nitrite Sensor Based on a AuNPs/CS/Ti3C2 Nanocomposite

Electrochemically Reduced Graphene Oxide/gold Nanoparticles Composite Modified Screen-Printed Carbon Electrode for Effective Electrocatalytic Analysis of Nitrite in Foods

A Novel Highly Sensitive Electrochemical Nitrite Sensor Based on a AuNPs/CS/Ti 3 C 2 Nanocomposite.

Electrochemical sensor based on nitrogen doped graphene: simultaneous determination of ascorbic acid, dopamine and uric acid.