Abstract:Heavy Vehicles speeds and dynamic loads are critical factors to bridge’s structure fatigue and rapid deterioration. The proposed paper addresses the modeling and simulation of dynamic loads of heavy vehicles, such as trucks and buses, on bridges and the effects of their speed on frequency response. In light of the above analysis, this paper proposes a method on how to minimize the structural vibrational of the combined vehicle and bridge system using semi-active suspension control. The vehicle dynamic load is minimized through an optimization scheme to yield an impact force with negligible bridge lateral deflection. The dynamic coupling between the vehicle and bridge are studied by examining the modes that are most likely to be excited by the vehicle speed and the roughness of the bridge surface. The models consist of a bridge and a heavy vehicle. The bridge is modeled as continuos, lightly damped beam with different supports defined by the boundary conditions. The vehicle is a multi-degree of freedom (MDOF) system undergoing motion in one plane. The methods of solution consist of a simple supported beam that closely simulates the first three beam modes of the Kishwaukee Bridge in Rockford, Illinois. The surface of the bridge generates some random excitation that serves as input to the vehicle, this is commonly known as the roughness of the bridge surface. The heavy vehicle is moving from left to right of the simply supported beam. The system is analyzed and optimized by semi-active control algorithms. Close form numerical solution is obtained by a set of second order differential equations for the bridge-vehicle system. Experimental data obtained from the vibration testing of Kishwaukee Bridge (Illinois) were collected and validated with a FEM model. Only the first three beam modes were used due to the experimental limitations and the actual structural condition of the bridge. Using MATLAB a simulation is obtained by inputting the linear time-variant equations and optimizing the system. Simulations of bridge vertical motion under different dynamic load conditions were examined and the results of bridge structure response were analyzed by comparing the effects of passive versus semi-active suspension controls. The method shows effectively how we can reduce the dynamic load force magnitude and its frequency of impact. The latter is usually associated with structural damage caused to the bridge.

Road Vehicle-Bridge Interaction Considering Varied Vehicle Speed Based on Convenient Combination of Simulink and ANSYS

Comparative study on bridge dynamic time-history response under the action of different vehicle-bridge models

An interactive method for the analysis of the simulation of vehicle–bridge coupling vibration using ANSYS and SIMPACK

Finite element based formulations for vehicle-bridge interaction system considering vertical motion

Computer-Aided Nonlinear Vehicle-Bridge Interaction Analysis

Dynamic Analysis of Coupled Vehicle-Bridge System with Uniformly Variable Speed

Development of an analytical model for treating bridge-vehicle interaction

Dynamic Analysis and Optimization of Vehicle-Bridge Interaction System under Road Roughness and Time Variability of Element Interpolation Function

A Precise Time-Integration Linear Vehicle-Bridge Interaction Method and Dynamic Sensitivity Analysis

Rigid–flexible coupled dynamic response of steel–concrete bridges on expressways considering vehicle–road–bridge interaction

Effects of Heavy Vehicle Speeds on the Structure and Vibration of Bridges

Nonlinear Dynamic Analysis of Multi-vehicle Vehicle-bridge Coupling System

A versatile element for analyzing vehicle–bridge interaction response

Numerical Solution Method for Analysis of Coupled Multi Axle Vehicle-Bridge Vibration Response

A Vehicle–Bridge Interaction Element: Implementation in ABAQUS and Verification

A general multi‐axle vehicle model to study the bridge‐vehicle interaction

FRAMEWORK OF WIND–VEHICLE–BRIDGE INTERACTION ANALYSIS AND ITS APPLICATIONS

Vehicle–bridge interaction dynamics and potential applications

Dynamic Analysis on Coupled Vehicle-bridge System by Modal Synthesis Method

Dynamic response of continuous girder bridge under moving vehicular loads

A Linear Complementarity Method for Dynamic Analysis of Bridges under Moving Vehicles Considering Separation and Surface Roughness