Abstract:The concept of phase reversion involving severe cold deformation of austenite at room temperature to generate strain-induced martensite, followed by annealing when martensite reverts to austenite via a diffusional mechanism, was used to obtain a “high strength, high ductility” combination in nanograined (NG) austenitic stainless steel. Using this concept, the objective of the study is to elucidate the dependence of grain size on deformation mechanisms and deformation-induced microstructural changes. The objective was accomplished by combining depth-sensing nanoindentation experiments conducted at strain rates spanning two orders of magnitude and post-mortem analyses of deformed Fe–17Cr–7Ni austenite alloy using transmission electron microscopy. The strain-rate sensitivity of the NG structure (0.13) was about twice the coarse-grained (CG) counterpart (0.06) and the activation volume was about one-third (16b3) of the CG structure (48b3), where b is the magnitude of the Burgers vector. In the high strength NG steel, deformation twinning contributed to excellent ductility, while in the low strength CG steel, ductility was also good, but due to strain-induced martensite, implying clear distinction and fundamental transition in the deformation behavior of NG and CG Fe–17Cr–7Ni austenitic stainless steels. In the NG structure, there was marked increase in stacking faults and twin density at high strain rates, which led to a decrease in the average spacing between adjacent stacking faults, converting stacking faults into twins. The plastic zone in the NG structure resembled a network knitted by the intersecting twins and stacking faults. The observed change in the deformation mechanism with change in grain size is attributed to increased stability of austenite with a decrease in grain size, and is explained in terms of the austenite stability–strain energy relationship.

High-cycle Fatigue Behavior of 18Cr-8Ni Austenitic Stainless Steels with Grains Ranging from Nano/ultrafine-Size to Coarse

Multi-scale Deformation Behavior Investigation of 18cr–8ni Austenitic Steel Subjected to Low-Cycle Fatigue Loading

Low cycle fatigue behavior of nickel-based superalloy GH4145/SQ at elevated temperature

The low-cycle fatigue, deformation and final fracture behaviour of an austenitic stainless steel

Investigation of Cyclic Deformation Behavior in the Surface Layer of 18cr–8ni Austenitic Stainless Steel Based on Vickers Microhardness Measurement

Mesoscopic mechanical properties of 18Cr-8Ni austenitic steel subjected to low-cycle fatigue loading

Variation In Mechanical Properties, Microstructures And Fracture Behavior Of 304 Stainless Steel During Low-Cycle Fatigue

Effects of low-cycle fatigue on static mechanical properties, microstructures and fracture behavior of 304 stainless steel

The Friction-Induced Microstructures Changes of 18Cr-8Ni Austenitic Stainless Steels with Different Grain Sizes

Enhanced Mechanical Properties Of Nano/Ultrafine-Grained Structure Formed By Martensite Reversion In 18cr-8ni Austenitic Stainless Steel

Effect of Grain Size on Ultra-High-Cycle Fatigue Properties of 42crmovnb Steel

Friction and wear behavior of nano/ultrafine-grained and heterogeneous ultrafine-grained 18Cr-8Ni austenitic stainless steels

Effect of grain size on the low cycle fatigue behavior of 316LN stainless steel in high temperature water

Cyclic Deformation Behavior of Fe-18Cr-18Mn-0.63N Nickel-Free High-Nitrogen Austenitic Stainless Steel

Multiscale Mechanical Fatigue Damage of Stainless Steel Investigated by Neutron Diffraction and X-ray Microdiffraction

Low-cycle Fatigue Characteristics of Cr18Mn18N0.6 Austenitic Steel under Strain Controlled Condition at 100 °C

Effect of Simulated Welding Thermal Cycles on Microstructure and Mechanical Properties of Coarse-Grain Heat-Affected Zone of High Nitrogen Austenitic Stainless Steel

In-situ tensile deformation of austenitic stainless steels with various grain sizes during synchrotron and neutron diffraction

Low Cycle Fatigue Behavior and Microstructure Evolution of a Novel Fe-22Cr-15Ni Austenitic Heat-Resistant Steel

Interplay Between Grain Structure, Deformation Mechanisms and Austenite Stability in Phase-Reversion-induced Nanograined/ultrafine-Grained Austenitic Ferrous Alloy

Neutron Diffraction Study of Low-Cycle Fatigue Behavior in an Austenitic–Ferritic Stainless Steel