Abstract:The migration characteristics of heavy metals during the melting process were one of the key factors for safe treatment and resource utilization of incineration fly ash (IFA). In this paper, the material variation of heavy metal elements of Pb, Zn, Cu, and Fe during the IFA melting process was simulated by HSC 6.0 chemistry software. The effects of melting temperature, alkalinity, atmosphere, chlorine content of raw materials, and an iron bath added to the migration characteristics, and phase transformation of selected heavy metal elements was investigated. The simulation results were also verified by experimental results. The results showed that, with the increase in temperature, the gas phase proportion of Pb, Zn, Cu, and Fe gradually increased. The alkalinity had little effect on the proportion of elements Fe and Cu in the liquid slag (LS) phase and the element Pb in the gas phase, but the increase in alkalinity could inhibit the proportion of element Zn in the gas phase. Zn mainly existed in the gas phase, and the atmosphere had little influence on the distribution of Zn. In reducing atmosphere (RA), elements Fe and Cu, which entered the liquid metal (LM) phase, were promoted, while the volatilization of Pb was restrained, which was conducive to the recovery of heavy metals. The melting process of IFA with water-washing and dechlorination had an inhibitory effect on the volatilization of Zn and Pb, but had little effect on Fe and Cu. The proportion of element Zn in the gas phase reduced from 85.84% to 9.89%. With the iron bath added in the IFA melting process, 98.42% of Cu and 82.28% of Pb entered the LM phase as metal simple substances, and 76.3% of Zn entered the gas phase as Zn (g) and ZnCl2 (g). In the experimental verification, the distribution proportions of the four heavy metals in the gas phase, LS phase, and LM phase were consistent with the simulation results.

Evolution of Heavy Metal Speciation in MSWI Fly Ash after Microwave-assisted Hydrothermal Treatment

Stabilization of Heavy Metals in Municipal Solid Waste Circulating Fluidized Bed Incineration Fly Ash by Fusion–hydrothermal Method

Microwave-Assisted Hydrothermal Treatment with Soluble Phosphate Added for Heavy Metals Solidification in MSWI Fly Ash

Mineral phase transition characteristics and its effects on the stabilization of heavy metals in industrial hazardous wastes incineration (IHWI) fly ash via microwave-assisted hydrothermal treatment

Heavy metal stabilization in MSWI fly ash using an additive-assisted microwave hydrothermal method

Stabilization of Heavy Metals in Municipal Solid Waste Incineration Fly Ash in Circulating Fluidized Bed by Microwave-Assisted Hydrothermal Treatment with Additives

Leaching of Heavy Metals from MSWI Fly Ash: Experiments Vs. Simulation

Adsorption of heavy metal ions using zeolite materials of municipal solid waste incineration fly ash modified by microwave-assisted hydrothermal treatment

Transformation Behavior of Heavy Metal During Co-thermal Treatment of Hazardous Waste Incineration Fly Ash and Slag/electroplating Sludge

Research on Stabilization of MSWI Fly Ash under Microwave Function by Wet Method

Low-toxic Zeolite Fabricated from Municipal Solid Waste Incineration Fly Ash Via Microwave-Assisted Hydrothermal Process with Fusion Pretreatment

Heavy metals stabilization in medical waste incinerator fly ash using alkaline assisted supercritical water technology.

Hydrothermal stabilization of fly ash from a fluidized bed incinerator co-firing refuse and coal

Immobilization Mechanism of Heavy Metals by Crystals and Liquid Phase During Melting Treatment of MSWI Fly Ash

Effects of Hydrothermal Treatment on the Major Heavy Metals in Fly Ash from Municipal Solid Waste Incineration

Vitrification of MSWI Fly Ash by Thermal Plasma Melting and Fate of Heavy Metals

Removal of Heavy Metals from Municipal Solid Waste Incineration (mswi) Fly Ash by Traditional and Microwave Acid Extraction

Mineral transformation and solidification of heavy metals during co-melting of MSWI fly ash with coal fly ash

Thermodynamic and Experimental Study on Migration Characteristics of Heavy Metals during the Melting Process of Incineration Fly Ash

Effect of Additive and Washing Pre-treatment on Heavy Metal Vaporization During Sintering Process of MSWI Fly Ash

The physical encapsulation and chemical fixation of Zn during thermal treatment process of municipal solid waste incineration (MSWI) fly ash