Abstract:Due to their efficient renewable energy consumption performance, AC/DC hybrid microgrids have become an important development form for future power grids. However, the fault response will be more complex due to the interconnected structure of AC/DC hybrid microgrids, which may have a serious influence on the safe operation of the system. Based on an AC/DC hybrid microgrid with an integrated bidirectional power converter, research on the interaction impact of faults was carried out with the purpose of enhancing the safe operation capability of the microgrid. The typical fault types of the DC sub-grid were selected to analyze the transient processes of fault circuits. Then, AC current expressions under the consideration of system interconnection structure were derived and, on this basis, we obtained the response results of non-fault subnets under the fault process, in order to reveal the mechanism of DC fault propagation. Subsequently, a current limitation control strategy based on virtual impedance control is proposed to address the rapid increase in the DC fault current. On the basis of constant DC voltage control in AC/DC hybrid microgrids, a virtual impedance control link was added. The proposed control strategy only needs to activate the control based on the change rate of the DC current, without additional fault detection systems. During normal operations, virtual impedance has a relatively small impact on the steady-state characteristics of the system. In the case of a fault, the virtual impedance resistance value is automatically adjusted to limit the change rate and amplitude of the fault current. Finally, a DC fault model of the AC/DC hybrid microgrid was built on the RTDS platform. The simulation and experimental results show that the control strategy proposed in this paper can reduce the instantaneous change rate of the fault state current from 19.1 kA/s to 2.73 kA/s, and the error between the calculated results of equivalent modeling and simulation results was within 5%. The obtained results verify the accuracy of the mathematical equivalent model and the effectiveness of the proposed current limitation control strategy.

Dead-time Effect on the CLLC-type DC Transformer in Hybrid AC/DC Microgrid with 50% Duty Ratio Control Scheme

Transmission Power Analysis and Control of the DC Transformer in Hybrid AC/DC Microgrid

CLLC-type DC Transformer in Hybrid AC/DC Microgrid with Maximum Power Transmission Ability and Robust Voltage Conversion Gain

Resonant Point Analysis of Generalized CLLC-Type DC Transformer in the Hybrid AC/DC Microgrid

Comprehensive Coordinated Frequency Control of Symmetrical CLLC-DC Transformer in Hybrid AC/DC Microgrids

Multitime Scale Frequency Regulation of a General Resonant DC Transformer in a Hybrid AC/DC Microgrid

Robust Circuit Parameters Design for the CLLC-Type DC Transformer in the Hybrid AC–DC Microgrid

Decentralized Economic Operation Control for Hybrid AC/DC Microgrid

Implementation of Bidirectional Resonant DC Transformer in Hybrid AC/DC Micro-Grid

Robust and Low‐cost Design of LLC‐type DC Transformer in Hybrid AC / DC Nano‐grids to Improve Energy Conversion Ability

Primary Double Winding Coupling DC Transformer for DC Micro-Grid Applications

Analysis and Experimental Validation of Current-Fed Switched Capacitor-Based Modular DC Transformer

Design of Symmetrical CLLC-Resonant DC Transformer Considering Voltage Transfer Ratio and Cascaded System Stability

Three-Step Switching Frequency Selection Criteria for Symmetrical CLLC-Type DC Transformer in Hybrid AC/DC Microgrid

A Hybrid Synchronous and Phase-Shifted Control Strategy for DC Transformer

The Improved Topology and Control Strategy for the HCLC in the Multiterminal Flexible DC Grid

A closed-loop DC-transformer control method for dual-active-bridge interlinking converters in DC microgrids

Analysis and Suppression of Circulating Harmonic Currents in a Modular Multilevel Converter Considering the Impact of Dead Time

Propagation Mechanism and Suppression Strategy of DC Faults in AC/DC Hybrid Microgrid

Multiple-Modular High-Frequency DC Transformer With Parallel Clamping Switched Capacitor for Flexible MVDC and HVDC System Applications

A mechanical DCCB with re-closure capability and its performance in MMC based DC grid