Abstract:The maximum sensitivity function as the conventional robustness index is often used to test the robustness and cannot be used to tune the controller parameters directly. To reduce analytical difficulties in dealing with the maximum sensitivity function and improve the control performance of the proportional-integral-derivative controller, the relative delay margin as a good alternative is proposed to offer a simple robust analysis for the proportional-integral-derivative controller and the first-order plus dead-time systems. The relationship between the parameters of the proportional-integral-derivative controller and the new pair, e.g., the phase margin and the corresponding gain crossover frequency, is derived. Based on this work, the stability regions of the proportional-integral-derivative controller parameters, the proportional gain and the integral gain with a given derivative gain, are obtained in a simple way. The tuning of the proportional-integral-derivative controller with constraints on the relative delay margin is simplified into an optimal disturbance rejection problem and the tuning procedure is summarized. For convenience, the recommended parameters are also offered. Simulation results demonstrate that the proposed methodology has better tracking and disturbance rejection performance than other comparative design methodologies of the proportional-integral/proportional-integral-derivative controller. For example, the integrated absolute errors of the proposed proportional-integral-derivative controller for the tracking performance and disturbance rejection performance are less than 91.3% and 91.7% of the integrated absolute errors of other comparative controllers in Example 3, respectively. The proposed methodology shows great potential in industrial applications. Besides, the proposed method can be applied to the design of the proportional-integral-derivative controller with filtered derivative which is recommended for practical applications to weaken the adverse influence of the high-frequency measurement noise.

Construction Pruning for Optimal Control of Process with Deadtime under Extreme High Degree of Control Difficulty

Predictive Functional Control for Multivariable First Order plus Dead Time System

Robust Control of Time-varying Nonlinear Systems with Unknown Control Directions

On Oscillation Reduction in Feedback Control for Processes with an Uncertain Dead Time and Internal–external Disturbances

Quantitative control of inverse response processes

Optimal Disturbance Rejection Controller Design for Integrating Processes with Dead Time Based on Algebraic Theory

PID CONTROL FOR INTEGRATOR AND DEAD TIME PROCESS

Quantitative Performance Design for Inverse-Response Processes

Optimal Disturbance Rejection for Pi Controller with Constraints on Relative Delay Margin

Robust LQ optimal controller designing for refining process

Robust Digital Controller Design For Processes With Dead Times: New Results

Robust digital double PI control for a general process with time-varying time delay

A New Design Method of Pid Controller for Inverse Response Processes with Dead Time

New PI-PD Controller Design Strategy for Industrial Unstable and Integrating Processes with Dead Time and Inverse Response

Analytical design of two-degree-of-freedom control scheme for open-loop unstable processes with time delay

Optimal Control for Integrator and Dead Time Process

PI tuning for processes with large dead time

A new PID controller design with constraints on relative delay margin for first-order plus dead- time systems

Enhanced Imc Design of Load Disturbance Rejection for Integrating and Unstable Processes with Slow Dynamics

Quantitative Performance Design of a Modified Smith Predictor for Unstable Processes with Time Delay

A Novel Double Loop Control Model Design for Chemical Unstable Processes.