Abstract:Adaptive arrays have been widely used for interference mitigation in Global Navigation Satellite System (GNSS) receivers. Unlike adaptive nulling, adaptive beam-forming generates a dedicated beam in the antenna pattern towards each individual satellite and form nulls in the interference directions at the same time. Thus, the satellite signals are enhanced while interferences are mitigated, resulting in improved signal-to-interference-plus-noise ratio (SINR). In previous literature mainly two categories of beam-forming mechanisms are recommended, namely the array synthesis method and the so-called "blind" beam-forming method. The array synthesis method calculates the steering vector directly, but needs a cumbersome correction procedure dealing with the non-ideal factors of the antenna array and radio frequency (RF) channels. The blind beam-forming method generates the steering vector on-the-fly using carrier phases collected by auxiliary tracking channels, thus avoids the correction procedure, but has a limited performance against interferences. As an alternative, we proposed a different beam-forming method, which can be regarded as a combination of the two above. This method consists of two steps. In the calibration step, a carrier phase look up table (LUT) is obtained using the live-sky signals. In the beam-forming step, the steering vector is generated by looking up the LUT. This method doesn't need a cumbersome non-ideal factor correction procedure, and has a good anti-interference performance, thus can be a third option for beam-forming.In order to implement and validate this method, a software-defined approach is used. Two real-time software receivers, one for the calibration step and one for the beam-forming step are designed and implemented. In order to meet the real-time requirement, a graphics processing unit (GPU) is used as an accelerator. A batched programming technique is used to fully take advantage of the parallelism offered by the GPU. Software design and programming details are introduced. Experiments are conducted in real environment and results are given. It concludes that this method has a good beam-forming performance in improving C/N-0 and getting more precise positioning results.

Research On Sparse Adaptive Beam-Forming Based On Non-Uniform Norm For Failure Elements

Adaptive Beamforming for Cascaded Sparse Diversely Polarized Planar Array

Generalized Widely Linear Robust Adaptive Beamforming: A Sparse Reconstruction Perspective

Closed-form Robust Adaptive Beamforming for Sparse Diversely Polarized Antenna Array

Robust Adaptive Beamforming Based on Particle Filter with Noise Unknown

Coprime Array Adaptive Beamforming With Enhanced Degrees-Of-Freedom Capability

Sparse-reconstruction-based high resolution beamforming and its application to multi-beam systems

A Robust and Efficient Algorithm for Coprime Array Adaptive Beamforming

Robust adaptive beamforming with broad nulls

Robust Adaptive Beamforming Algorithm for Sparse Array Based on Covariance Matrix Reconstruction Technology

Robust adaptive null broadening beamforming based on subspace projection

Sparse Array Beamformer Design via ADMM

Improved Main-Beam Nulling Through Single Switchable Displaced Element for Small Scale Adaptive Array

Hybrid Sparse Array Beamforming Design for General Rank Signal Models

Robust Adaptive Beamforming Based on Subspace Decomposition, Steering Vector Estimation and Correction

Psychiatric symptomatology among hospitalized cancer patients.

A quasi-newton-based adaptive beamforming algorithm for antenna array of CDMA systems

An Improved Adaptive Constrained Constant Modulus Reduced-Rank Algorithm with Sparse Updates for Beamforming

A Two-Step Beam-Forming Method Based on Carrier Phases for Gnss Adaptive Array Anti-Jamming

Mainbeam Nulling Through Singular Element For Adaptive Array

Sparse Array Enabled Near-Field Communications: Beam Pattern Analysis and Hybrid Beamforming Design