Abstract:Near-ultraviolet-pumped white light-emitting diodes (LEDs) based on the combination strategy of traditional RGB phosphors (blue/green/red) or blue/yellow phosphors have the drawback of inadequate color rendering index due to the cyan-gap (480–500 nm) in the emission spectrum. It is quite promising to find efficient cyan-emitting phosphors that can offset the cyan-gap to produce white LEDs with full-spectrum emission. In our work, we synthesized a Ce3+-activated ScCaO(BO3) (SCB:Ce3+) phosphor with a broadband blue-cyan emission. Under near-ultraviolet 396 nm excitation, the optimum SCB:0.005Ce3+ sample shows a blue-cyan emission band with a peak of 473 nm, which is competent for filling the cyan-gap. Meanwhile, the SCB:0.005Ce3+ blue-cyan phosphor possesses a high quantum efficiency (internal quantum efficiency = 66.5%, external quantum efficiency = 38.5%) and weak chromaticity shift (ΔEs = 1.29 × 10−2). We produce white LED devices based on 395 nm LED chips and RGB or blue/yellow/red phosphors strategies. By comparing the performance parameters of white LED devices with or without blue-cyan SCB:0.005Ce3+ phosphor, it is proved that SCB phosphor can offset the cyan gap of commercial RGB phosphors and the cyan emission lack of commercial Y3Al5O12:Ce3+ phosphor. Furthermore, SCB:0.005Ce3+ phosphor can substitute for commercial BaMgAl10O17:Eu2+ phosphor in RGB or blue/yellow/red phosphors combinations. The prepared white LEDs based on SCB:0.005Ce3+ blue-cyan phosphor, green/red or yellow/red phosphors show a lower proportion of high-energy blue light and are suitable for healthy lighting applications.

An optimal spectral model for phosphor-converted white light-emitting diodes used in the mesopic vision

Design of highly efficient phosphor-converted white light-emitting diodes with color rendering indices (R1 − R15) ≥ 95 for artificial lighting

Realizing White LEDs with High Luminous Efficiency and High Color Rendering Index by Using Double Green Phosphors

An Investigation on CCT and Ra Optimization for Trichromatic White LEDs Using a Dual-Weight-Coefficient-Based Algorithm

CaS: Sb3+, Na and ZnS:Sn2+: phosphor materials for the improvement of WLEDs

Design efficient energy transfer Ca2Al2SiO7: Bi3+, Eu3+ phosphors by cationic substitution for full-spectrum W-LED lighting

Study on the Performance of Deep Red to Near-Infrared pc-LEDs by the Simulation Method Considering the Distribution of Phosphor Particles

Spectral Optimization Simulation Of White Light Based On The Photopic Eye-Sensitivity Curve

Predictive features for persistence of atopic dermatitis in children

Photometric Optimization of Color Temperature Tunable Quantum Dots Converted White LEDs for Excellent Color Rendition

Cesium lead halide perovskite quantum dot-based warm white light-emitting diodes with high color rendering index

Composition and structure design of three-layered composite phosphors for high color rendering chip-on-board light-emitting diode devices

Spectral Optimization of White LED Based on Mesopic Luminance and Color Gamut Volume for Dim Lighting Conditions

Novel strategy to optimize luminance for phosphor-converted laser lighting

Highly Efficient Green‐to‐Yellowish‐Orange Emitting Eu2+‐Doped Pyrophosphate Phosphors with Superior Thermal Quenching Resistance for W‐leds

Kerr electro-optic field mapping measurements in highly purified water between coaxial electrodes

Optical Model of Laminated Remote Phosphor Films and Its Application in White LED

Achieving full-visible-spectrum LED lighting via employing an efficient Ce3+-activated cyan phosphor

Low-concentration Ce3+-activated ScCaO(BO3) Blue-Cyan Phosphor with High Efficiency Toward Full-Spectrum White LED Applications

Luminescence mechanism analysis on high power tunable color temperature Chip-on-Board white LED modules

Thermally stable and highly efficient red-emitting Eu3+-doped Cs3GdGe3O9 phosphors for WLEDs: non-concentration quenching and negative thermal expansion