CFETR Integration Design Platform: Development of Space Analysis Module

J. S. Deng,Z. Y. Zhu,Y. Li,Z. W. Wang,S. F. Mao,X. F. Liu,M. Y. Ye

DOI: https://doi.org/10.1016/j.fusengdes.2018.06.013

IF: 1.905

2018-01-01

Fusion Engineering and Design

Abstract:Space allocation is important in the design of a fusion reactor, where numerous components operate under complex conditions, including a strong magnetic field, high-energy neutron irradiation, and a wide temperature range (4.5 K at the magnet and similar to 300-500 degrees C at the blanket). To ensure the consistency of the China Fusion Engineering Test Reactor (CFETR) design, multi-component interference checks and distance measurements must be routinely performed. In this paper, a space analysis module is developed on the CFETR Integration Design Platform to provide the space analysis function for both rigid and deformed components (using the Representative-Triangles method). The example of the space allocation of a vacuum vessel (VV) and a thermal shield (TS) is demonstrated. The deformation due to heating under the bake-out condition is considered (during operation, heating and swelling due to radiation also cause deformation). With the input from the component design module, the space analysis can be well-performed for both rigid models and thermal deformation results (under the simplified boundary condition). Through iteration between the component design modules and the space analysis module, a preliminary designed clearance of 40 mm between the VV and TS is insufficient owing to the deformation during bake out, and the optimized clearance increases by a factor of two.