Abstract:Process monitoring and control is an essential approach to improve additive manufacturing (AM) built quality. For the development of powder bed fusion (PBF) AM monitoring system, sensing process optical emission is a popular approach. This is because it provides rich information on melt pool condition which directly determines final part quality. However, the optical emission information is convoluted. And lack of full understanding of it limits the further development of an optimal monitoring system. Therefore, the aim of this study is to explore the correlations between the optical emission and the processing condition to help enhance PBF process monitoring. A high-speed camera was used to acquire the images of the optical emission in the waveband of 800–1,000 nm. Several typical features were extracted and analyzed with the increase of laser power. The K-means clustering method was used to identify the hidden patterns of these features. Five hidden patterns have been identified, and therefore the collected dataset was partitioned into five subsets. The extracted features in each subset were characterized. It is found that (1) plume area and plume orientation are the two most crucial features for processing condition monitoring; (2) number of spatters and spatter dispersion index are sensitive to some minor process vibrations which have little effect on built quality. Additionally, the SVM model was built for process quality identification. It is found that (3) the time sequence information of the features can help improve the quality identification performance.

Extraction and Evaluation of Melt Pool, Plume and Spatter Information for Powder-Bed Fusion AM Process Monitoring

Investigation into the optical emission of features for powder-bed fusion AM process monitoring

A New Approach for Online Monitoring of Additive Manufacturing Based on Acoustic Emission

Experimental Study of the Process Failure Diagnosis in Additive Manufacturing Based on Acoustic Emission

Powder-Bed Fusion Process Monitoring by Machine Vision With Hybrid Convolutional Neural Networks

A feature-level multi-sensor fusion approach for in-situ quality monitoring of selective laser melting

Application of machine vision for the detection of powder bed defects in additive manufacturing processes

A CNN-Based Adaptive Surface Monitoring System for Fused Deposition Modeling

Machine learning based in situ quality estimation by molten pool condition-quality relations modeling using experimental data

Manufacturing Quality Prediction Using Smooth Spatial Variable Selection Estimator with Applications in Aerosol Jet®printed Electronics Manufacturing

Qualify assessment for extrusion-based additive manufacturing with 3D scan and machine learning

In-Situ Laser-Based Process Monitoring and In-Plane Surface Anomaly Identification for Additive Manufacturing Using Point Cloud and Machine Learning

Research on Automated Defect Classification Based on Visual Sensing and Convolutional Neural Network-Support Vector Machine for GTA-Assisted Droplet Deposition Manufacturing Process

A New Method for Automatic Detection of Defects in Selective Laser Melting Based on Machine Vision

Online Convolutional Neural Network-based anomaly detection and quality control for Fused Filament Fabrication process

A Data Driven Approach to the Online Monitoring of the Additive Manufacturing Process

In situ porosity intelligent classification of selective laser melting based on coaxial monitoring and image processing

Design of a Multi-sensor Monitoring System for Additive Manufacturing Process

Applications of machine learning in metal powder-bed fusion in-process monitoring and control: status and challenges

Deep Learning Based Monitoring of Spatter Behavior by the Acoustic Signal in Selective Laser Melting

A Computer Vision Approach to Evaluate Powder Flowability for Metal Additive Manufacturing