Abstract:The overall electrochemical performance of carbon anodes for potassium-ion batteries (PIBs) is considerably restricted by their poor cyclic property and rate capability issues. Herein, we report a water chestnut-derived slope-dominated carbon anode through moderate-temperature pyrolysis at 900 °C, which manifests a high initial reversible capacity of 253.2 mAh g–1 at a current density of 100 mA g–1, remarkable rate property of 134.8 mAh g–1 at 1000 mA g–1, and impressive cycling performance of 220.5 mAh g–1 at 100 mA g–1 after 1000 cycles. When assembled with the potassiated 3,4,9,10-perylene-tetracarboxylic acid dianhydride cathode, the initial reversible capacity reaches 124.3 mAh g–1 at 25 mA g–1, and 84.7% of the capacity is maintained even after 300 cycles at 50 mA g–1. The improved potassium storage properties could be ascribed to the disordered microstructure with relatively larger oxygen-containing defect concentration, high specific surface area, and stochastically oriented short graphene nanosheets. Density functional theory calculations illustrate that oxygen doping can effectively alter the charge density distribution of carbon and facilitate the adsorption of K+ on water chestnut-derived carbon, which boosts potassium ion storage. This work would provide a promising avenue to design and synthesize slope-dominated carbon materials for low-cost PIBs with excellent rate and cycling properties and high safety.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c02327?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c02327</a>.XPS spectrum, TGA curves, FT-IR spectra, digital images, R parameter calculation, HRTEM images, SAED pattern, SEM images, N2 adsorption–desorption isotherms, Raman spectra, MS spectrum, charge–discharge profiles, lithium and sodium storage properties, and Merz–Kollman charges. Physical parameters obtained from the XRD and Raman measurements, elemental analysis results, comparison of potassium storage properties of various carbon anodes, and the fitted impedance values and Warburg factors as well as K+ diffusion coefficients (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c02327/suppl_file/ae0c02327_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Highly Disordered Hard Carbon Derived from Skimmed Cotton As a High-Performance Anode Material for Potassium-Ion Batteries

Sandwich‐Like FeCl3@C As High‐Performance Anode Materials for Potassium‐Ion Batteries

Cotton-derived Oxygen/sulfur Co-Doped Hard Carbon As Advanced Anode Material for Potassium-Ion Batteries

Nitrogen-Rich Hard Carbon As A Highly Durable Anode for High-Power Potassium-Ion Batteries

Carbon Composite Anodes with Tunable Microstructures for Potassium‐Ion Batteries

High‐Coulombic‐Efficiency Hard Carbon Anode Material for Practical Potassium‐Ion Batteries

Biomass‐Derived Phosphorus‐Doped Porous Hard Carbon Anode for Stable and High‐Rate Sodium Ion Batteries

Hard Carbon Anode Synthesized by an In Situ Porous Strategy for Advanced Potassium-Ion Batteries

Hard carbon: a potential anode material for potassium ion batteries and its current bottleneck

Hard carbon derived from rice husk as anode material for high performance potassium-ion batteries

Water Chestnut-Derived Slope-Dominated Carbon as a High-Performance Anode for High-Safety Potassium-Ion Batteries

Highly nitrogen doped carbon nanofibers with superior rate capability and cyclability for potassium ion batteries

Bagasse-Derived Hard Carbon Anode with an Adsorption–Intercalation Mechanism for High-Rate Potassium Storage

Investigating K+ Storage Behavior of Highly Graphitized Carbon Fibers As Anodes for a Potassium-Ion Battery.

From Natural Fibers to High-Performance Anodes: Sisal Hemp Derived Hard Carbon for Na-/K-Ion Batteries and Mechanism Exploration

Facile preparation of heteroatom S doped dumbbell-like hard carbon for boosting potassium-ion storage capability

Biomass‐Derived Carbon With Large Interlayer Spacing for Anode of Potassium Ion Batteries

Long-Cycling and High-Rate Potassium Storage Enabled by Sulfur-Doped Carbon Derived from Disposable Chopsticks

Regulating Graphitic Microcrystalline and Single‐Atom Chemistry in Hard Carbon Enables High‐Performance Potassium Storage

Bio-derived Hierarchically Porous Heteroatoms Doped‑carbon As Anode for High Performance Potassium-Ion Batteries

Synthesizing Hard Carbon Anodes for Potassium-Ion Batteries from Black Liquor and Deinking Sludge