Abstract:The effects of surface and flexoelectricity have been found in the presence of strong size dependence and should be technically taken into account for nano-scaled dielectric structures. This paper proposes a Bernoulli-Euler beam model to investigate the electromechanical coupling response of piezoelectric nanostructures, in which the effects of surface elasticity, dielectricity and piezoelectricity as well as bulk flexoelectricity are all taken into consideration. The governing equations with non-classical boundary conditions are naturally derived from a variational principle. Then the present beam model is directly applied to solve the static bending problems of cantilever beams. Without considering the residual surface stresses, the bending rigidity can be defined the same as that in classical piezoelectricity theory. The bending rigidity is found to increase for silicon nanowires and decrease for silver nanowires. Also the flexoelectric effect in piezoelectric nanowires has a momentous influence on the bending rigidity. The residual surface stresses which are usually neglected are found to be more important than the surface elasticity for the bending of nanowires. However, this has no influence on the effective electromechanical coupling coefficient. The deflections reveal the significance of the residual surface stresses and the bulk flexoelectric effects. The effective electromechanical coupling coefficient for piezoelectric nanowires is dramatically enhanced, which demonstrates the significant effects of the bulk flexoelectricity and surface piezoelectricity. The effects of surface and flexoelectricity decrease with the increase of the beam thickness, and therefore these effects can be ignored for large-scale structures. This work is very helpful in designing cantilever-beam-based nano-electro-devices.

Fracture analysis of flexoelectric double cantilever beams based on the strain gradient theory

Large Deformation and Strain Gradient Fracture Analysis of Double Cantilever Beams with Piezoelectric Effect

Nonlinear Fracture Mechanics Analysis of Nano-Scale Piezoelectric Double Cantilever Beam Specimens with Surface Effect

Dynamic Flexoelectric Actuation and Vibration Control of Beams

Static Nano-Control Of Cantilever Beams Using The Inverse Flexoelectric Effect

Coupling Analysis of Flexoelectric Effect on Functionally Graded Piezoelectric Cantilever Nanobeams

Effect of Surface Residual Stress on the Fracture of Double Cantilever Beam Fracture Toughness Specimen

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

A Double Cantilever Beam Model for Fracture Toughness Analysis of Superconductors

An analysis of flexoelectric coupling associated electroelastic fields in functionally graded semiconductor nanobeams

Flexoelectric Control of Beams with Atomic Force Microscope Probe Excitation

Multiflexoelectric Actuation and Control of Beams

A complete solution to generally orthotropic DCBS with shear deformation and crack-tip rotation consideration

The electro-mechanical coupling responses of functionally graded piezoelectric nanobeams with flexoelectric effect

A meshfree formulation for large deformation analysis of flexoelectric structures accounting for the surface effects

Bernoulli–Euler Dielectric Beam Model Based on Strain-Gradient Effect

Effects Of Surface And Flexoelectricity On A Piezoelectric Nanobeam

A double cantilever beam incorporating cohesive crack modeling for superconductors

Vibration Analysis of Piezoelectric Sandwich Nanobeam with Flexoelectricity Based on Nonlocal Strain Gradient Theory

Mechanical Design of Uniform Strain-Gradient Schemes for Transverse and Longitudinal Flexoelectricity

Bending and Vibration Analysis of Flexoelectric Beam Structure on Linear Elastic Substrates