Abstract:Understanding heat transfer process of liquid thin film evaporation in porous media or on microstructured surfaces is the key for optimal designs of phase-change based thermal management devices, such as vapor chambers or flat heat pipes. In this paper, a newly developed 3D thermal Lattice Boltzmann method (LBM), incorporating double distribution functions (DDF), pseudo-potential model and equation of state (EOS) of a real gas, is used to simulate dynamic evaporation along the vapor/liquid interface and boiling in the liquid thin film on a microstructured surface consisting of micro pillars. Simulations are conducted under constant heat fluxes for four solid hydrophilic surfaces with contact angles of 10°, 23°, 37° and 63° respectively. Residual liquid volume, two-phase interface morphology, wall temperature distribution, as well as effective heat transfer coefficient and CHF under different conditions are discussed in details. With increasing heat flux, it is found that the liquid thin film recedes gradually into the wick structure, with the lowest liquid level at the center of the heating area, to maintain a continuous liquid supply via capillary pumping. The receding of the liquid thin film can normally enhance evaporation heat transfer because it not only reduces the thermal conduction resistance of liquid thin films, but also elongates the evaporating liquid meniscus along the height direction of micro pillars. For larger contact angles of 37° and 63° for example, dry-out initiates from the heating center at a sufficiently high heat flux, leading to serious deterioration of heat transfer with expansion of the dry-out area. However, for smaller contact angle of 10° and 23°, fixed and periodical bubble nucleation appears sequentially before dry-out heat flux. At small heat fluxes, there is no obvious difference in effective heat transfer coefficient for four hydrophilic surfaces. On the other hand, considerable increase of effective heat transfer coefficient can be obtained at higher heat flux on a stronger hydrophilic surface because of the receding of the liquid film can sustain a higher dry-out heat flux, or CHF.

Lattice Boltzmann Simulation of Co-Existing Boiling and Condensation Phase Changes in a Confined Micro-Space

Lattice Boltzmann Modeling of Pool Boiling with Large Liquid-Gas Density Ratio

Lattice Boltzmann simulations for surface wettability effects in saturated pool boiling heat transfer

Pool Boiling on Hybrid-Wettability Surfaces with Phase-Change Lattice Boltzmann Model

Multiphase SPH Modeling of Water Boiling on Hydrophilic and Hydrophobic Surfaces

Lattice Boltzmann investigation of flow boiling in a microchannel

A Multicomponent Multiphase Enthalpy-Based Lattice Boltzmann Method for Droplet Solidification on Cold Surface with Different Wettability

Hybrid Phase-Change Lattice Boltzmann Simulation of Vapor Condensation on Vertical Subcooled Walls

2D Simulation of Boiling Heat Transfer on the Wall with an Improved Hybrid Lattice Boltzmann Model

Lattice Boltzmann modeling of boiling heat transfer: The boiling curve and the effects of wettability

Numerical simulation of pool boiling heat transfer on smooth surfaces with mixed wettability by lattice Boltzmann method

Recent Analytical and Numerical Studies on Phase-Change Heat Transfer

Lattice Boltzmann method for simulation of solid-liquid conjugate boiling heat transfer surface with mixed wettability structures

Numerical Investigation of Phase Change Heat Transfer in a Confined Micro-Space by Lattice Boltzmann Method

Simulation of Liquid Thin Film Evaporation and Boiling on a Heated Hydrophilic Microstructured Surface by Lattice Boltzmann Method

Study on Boiling Heat Transfer of Surface Modification Based on Lattice Boltzmann and Experiments

Study of boiling heat transfer on the wall with an improved hybrid lattice Boltzmann model

Investigation of bubble dynamics and boiling heat transfer characteristics under vertically heating walls via lattice Boltzmann method

Boiling Heat Transfer on Hydrophilic-Hydrophobic Mixed Surfaces: A 3D Lattice Boltzmann Study

Lattice Boltzmann Simulations for Transition from Dropwise to Filmwise Condensation on Hydrophobic Surfaces with Hydrophilic Spots

How does boiling occur in lattice Boltzmann simulations?