Abstract:To avoid carcinogenicity, formaldehyde gas, currently being only detected at higher operating temperatures, should be selectively detected in time with ppb concentration sensitivity in a room-temperature indoor environment. This is achieved in this work through introducing oxygen vacancies and Pt clusters on the surface of In2O3 to reduce the optimal operating temperature from 120 to 40 °C. Previous studies have shown that only water participates in the competitive adsorption on the sensor surface. Here, we experimentally confirm that the adsorbed water on the fabricated sensor surface is consumed via a chemical reaction due to the strong interaction between the oxygen vacancies and Pt clusters. Therefore, the long-term stability of formaldehyde gas detection is improved. The results of theoretical calculations in this work reveal that the excellent formaldehyde gas detection of Pt/In2O3–x originates from the electron enrichment due to the surface oxygen vacancies and the molecular adsorption and activation ability of Pt clusters on the surface. The developed Pt/In2O3–x sensor has potential use in the ultraefficient, low-temperature, highly sensitive, and stable detection of indoor formaldehyde at an operating temperature as low as room temperature.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssensors.2c00334.Synthetic methods of In2O3, In2, and Pt/In2O3–x; gas-sensing experiments and DFT calculations; XRD patterns of In2O3, In2O3–x, and Pt/In2O3–x; N2 adsorption–desorption isotherms and corresponding pore-size distribution curves of In2O3, In2O3–x, and Pt/In2O3–x; SEM images of In2O3, In2O3–x, and Pt/In2O3–x; HAADF-STEM images of Pt/In2O3; HAADF-STEM images of In2O3; HAADF-STEM images of In2O3–x, ABF-STEM images of In2O3–x, magnified area of the region, and intensity profile corresponding to the yellow dashed line; In 3d, O 1s, and Pt 4f high-resolution XPS spectra of In2O3, In2O3–x, and Pt/In2O3–x before and after the reaction; EPR spectrum of In2O3–x; response time of the In2O3 sensor in 100 ppm HCHO at different temperatures; response time of the In2O3–x sensor in 100 ppm HCHO at different temperatures; response time of the Pt/In2O3–x sensor in 100 ppm HCHO at different temperatures; dynamic sensing transient curves for different HCHO concentrations of In2O3, In2O3–x, and Pt/In2O3–x at optimum working temperature; DMPO spin-trapping ESR spectrum of Pt/In2O3–x for O–; structure models and adsorption energies for various gases of In2O3, In2O3–x, and Pt/In2O3–x; gas-sensing reproducibility of In2O3, In2O3–x, and Pt/In2O3–x sensors at an optimum working temperature; dynamic sensing transient curves for different concentrations of HCHO of In2O3–x and Pt/In2O3–x sensors at room temperature; gas-sensing reproducibility of In2O3, In2O3–x, and Pt/In2O3–x sensors at room temperature; dynamic sensing transient curves for low concentration of HCHO of Pt/In2O3–x; corresponding log(Sg–1) versus log(Cg) curves and response–recovery times of In2O3–x and Pt/In2O3–x sensors at room temperature; selectivity of In2O3, In2O3–x, and Pt/In2O3–x sensors at room temperature; DOS and PDOS of In2O3, In2O3–x, and Pt/In2O3–x sensors before and after the adsorption of oxygen and formaldehyde; structural models and adsorption energies for water molecules, oxygen, and formaldehyde of In2O3, In2O3–x, and Pt/In2O3–x; corresponding mapping of in situ FTIR spectra: gas-sensing reaction on the -Abstract Truncated-

Highly discriminative and sensitive detection of volatile organic compounds for monitoring indoor air quality using pure and Au-loaded 2D In2O3 inverse opal thin films

Ultrasensitive In2O3-Based Nanoflakes for Lung Cancer Diagnosis and the Sensing Mechanism Investigated by Operando Spectroscopy.

Enhanced Ethanol-Sensing Characteristics of Au Decorated In-doped SnO2 Porous Nanotubes at Low Working Temperature

Monolayer Co3O4 Inverse Opals As Multifunctional Sensors for Volatile Organic Compounds

Realizing the Control of Electronic Energy Level Structure and Gas-Sensing Selectivity over Heteroatom-Doped In2O3 Spheres with an Inverse Opal Microstructure

Anchoring Platinum Clusters onto Oxygen Vacancy-Modified In 2 O 3 for Ultraefficient, Low-Temperature, Highly Sensitive, and Stable Detection of Formaldehyde

Three-dimensional Ordered SnO2 Inverse Opals for Superior Formaldehyde Gas-Sensing Performance

Three-dimensional Hierarchical CuO Gas Sensor Modified by Au Nanoparticles

Highly selective detection of ppb-level formaldehyde realized by regulating the surface chemisorbed oxygen of Ga-doped In 2 O 3 microspheres

Isopropanol sensor based on sprayed In2S3 thin film using linear discriminant analysis for real-time selectivity

Ultra-high ethanol sensitivity sensor based on porous In2O3 decorated with gold nanoparticles

Au144 loaded hierarchical In2O3 nanospheres for effective detection of acetone in simulated exhalation

Synthesis of novel layer-packed In2O3 nanostructures and their application in gas sensor for detecting indoor air contaminants.

Polyphenol-Mediated Synthesis of Mesoporous Au–In2O3 Nanospheres for Room-Temperature Detection of Triethylamine

Synergistic Effect of Au-PdO Modified Cu-Doped K2W4O13 Nanowires for Dual Selectivity High Performance Gas Sensing

Expanding Selectivity Functionality of a ZnO Nanotetrapod-Based Volatile Organic Compound Sensor Using Au Nanoparticle Decoration

Discriminative analysis of volatile organic compounds using machine-learning assisted Au loaded ZnO and TiO 2 -based thin film sensors

Comprehensive study of formaldehyde gas sensing performance of a GTO thin film incorporated with gold nanoparticles

Low concentration isopropanol gas sensing properties of Ag nanoparticles decorated In2O3 hollow spheres

Study of Ethanol Gas Sensing Characteristics of An Al-Doped SnO$_{\text{2}}$ Thin Film Decorated With Gold Nanoparticles

Au Nanoparticles Decorated Mesoporous SiO2 -WO3 Hybrid Materials with Improved Pore Connectivity for Ultratrace Ethanol Detection at Low Operating Temperature.