Abstract:Rice husk ash (RHA) is currently utilized as a supplementary cementitious material in cement products due to its pozzolanic properties. This work aims to investigate the pozzolanic effect (PE) and the filler effect (FE) of RHA on the mechanical properties and microstructure of cemented paste backfill (CPB). RHA and inert quartz sand were ground to similar particle sizes and used to prepare CPB, partially replacing the Portland cement traditionally used in these mixtures. Unconfined compressive strength (UCS) tests and scanning electron microscopy (SEM) were used to analyze the mechanical properties and microstructure of the CPB, respectively. The effects of the RHA content, cement-to-tailings ratio (C/T), and mass concentration (MC) on the UCS of the CPB samples were investigated. The results show that RHA can enhance the strength of the CPB even at concentrations of less than 20 wt.%. It was also found that the MC has a greater effect on the strength of CPB produced with RHA compared to the C/T. The CPB sample with the highest pozzolanic activity index (PAI) of 101.63% had a C/T of 1:4 and an MC of 74%. The proportion of the UCS of the CPB that could be attributed to the PE was 67.30–87.92% higher than could be attributed to the FE in samples with RHA contents ranging from 10–20%. The FE of RHA exerted a stronger influence at lower curing times due to the early hydration of blended materials, while the influence of the PE of RHA was limited at curing times of 3 d. In contrast, the PE played a more crucial role at curing times of more than 3 d. SEM analysis showed that CPB produced with 10–20% RHA exhibits a dense and homogeneous microstructure. Thus, the influence of the PE of RHA on the mechanical properties and microstructure of CPB was far more significant than the FE of RHA at a curing time of 28 d. These results provide new insights into the potential use of RHA as a cementitious material for use in backfilling during mining operations.

Mechanical properties and microstructure of ultra-high performance cement-based composite incorporating RHA

Influence of rice husk ash on the mechanical properties of ultra-high strength engineered cementitious composites (UHS-ECC)

COMPRESSIVE STRENGTHS OF CONCRETE CONTAINING RICE HUSK ASH WITHOUT PROCESSING

Mechanical and microstructural properties of high-performance concrete made with rice husk ash internally cured with superabsorbent polymers

Nanoindentation Characteristics of Cement Paste and Interfacial Transition Zone in Mortar with Rice Husk Ash

Recycled aggregate concrete with the incorporation of rice husk ash: Mechanical properties and microstructure

Influence of Rice Husk Ash on Strength and Permeability of Ultra-High Performance Concrete

Microstructure and mechanical properties of sustainable cemented-paste backfill materials with the substitution of alkali-activated rice husk ash

The Role and Mechanism of Rice Husk Ash Particle Characteristics in Cement Hydration Process

Influence of Rice Husk Ash and Super-Absorbent Polymer on the Properties of Cement-Based Composites

Mechanical properties and microstructure of ultra-high performance concrete with low cement content

Studies on effects of burning conditions and rice husk ash (RHA) blending amount on the mechanical behavior of cement

Hydration and Microstructure of Cement Pastes Containing Limestone Powder and Rice Husk Ash

Mechanism Development of Strength Contributed by CPB with Rice Husk Ash

Properties of fresh and hardened self-compacting concrete incorporating rice husk ash: A review

The Synergistic Effect of Limestone Powder and Rice Husk Ash on the Mechanical Properties of Cement-Based Materials

Mechanical Behaviors And Chloride Permeability Of Rice Husk Ash Concrete

Performance and Properties of Mortar Mixed with Nano-Cuo and Rice Husk Ash

Experimental study on the aluminate cement modified with rice hull ash

Experiment study on the mechanical properties and alkali silica reaction (ASR) of mortar blended rice husk ash (RHA)

Strength Performance of Concrete Using Rice Husk Ash (RHA) as Supplementary Cementitious Material (SCM)