Abstract:Here, we demonstrate processing techniques for KNO3 preparation through green chemical reaction engineering of abundant rock-forming minerals to achieve materials sustainability. In this study, chemical reactions at both low and high temperatures were conducted to investigate the extraction of potassium from kalsilite, KAlSiO4 for use as a K-fertilizer material and simultaneous transformation of kalsilite to materials such as aluminosilicate gel at low temperatures or muscovite at high temperatures; both these materials have many uses. In the low temperature range of 30 to 80 degrees C, the optimal conditions to extract potassium from KAlSiO4 and to obtain aluminosilicate gel were found to be as follows: by using then (HNO3)/n(KAlSiO4) ratio of 1.1, solid to water (S/L) ratio of 1 : 10, a reaction time of 3 h and a temperature of 40 degrees C. In the high temperature range of 210 to 250 degrees C, both potassium extraction and crystallization of muscovite were achieved at 250 degrees C. The mechanisms of K extractions and the simultaneous crystallization of muscovite at higher temperatures were determined by using different characterization techniques such as X-ray diffraction, SEM/TEM, Fourier transform infrared spectroscopy (FTIR), and magic-angle-spinning nuclear magnetic resonance spectroscopy (MAS NMR). Results from the above characterization tools demonstrated that kalsilite can be converted to muscovite by dissolution and recrystallization under hydrothermal conditions at 250 degrees C while releasing K into solution simultaneously. Three comprehensive utilization routes of potassium-rich rocks for KNO3 preparation were proposed. Our current results suggest that molecular engineering of abundant natural minerals may lead to materials sustainability through a green chemical approach where reactions are conducted in a closed system to prevent pollution and recover all the components as resources.

Hydrothermal Synthesis of Nano-Kaolinite from K-feldspar

Hydrothermal Crystallization of Nano-kaolinite from Precursor of Acid Treating Kalsilite

Two-step Hydrothermal Synthesis of Nano-Kaolinite from Fly Ash: Thermodynamics and Mechanism

Sustainable Materials by Mimicking Natural Weathering

Green synthesis of nano-muscovite and niter from feldspar through accelerated geomimicking process

Preparation of potassium sulfate from K-feldspar by hydrothermal alkaline method:reaction principle and process evaluation

Preparation of potassium sulfate and zeolite NaA from K-feldspar by a novel hydrothermal process

Formation of 0.84 Nm Hydrated Kaolinite as an Environmentally Friendly Precursor of a Kaolinite Intercalation Compound

Synthesis of New Kaolin Molecular Sieves from Kaolin and Its Adsorption of Nh4+

A Case Study Targeting K Fertilizer Chemical Synthesis With Complete Valorization Of Extraction By-Products As An Option

One-pot Hydrothermal Synthesis of the Dual-Phase Anatase/tio2-B Nanoparticles with K2Ti6O13 Nanofibers for Enhanced Photocatalysis

Rapid Synthesis of Kaolinite Nanoscrolls through Microwave Processing

Preparation and Mechanism of Nano Mullite Powders from Kaolin Via Open Hydrothermal Process.

Simple and rapid synthesis of zeolite W from K‐feldspar via the improved hydrothermal method

Synthesis of KAlSiO4 by Hydrothermal Processing on Biotite Syenite and Dissolution Reaction Kinetics

Hydrothermal Synthesis of Analcime and Hydroxycancrinite from K-feldspar in Na2SiO3solution: Characterization and Reaction Mechanism

Hydrothermal Synthesis of K-ZSM-5 Molecular Sieve from Potassium Feldspar

Preparation of Nano-Sized Wollastonite Using Calcium Silicate Residue of Potassium Feldspar after Extraction of Potassium and Alumina

Hydrothermal Synthesis of Zeolite A from K-feldspar and Its Crystallization Mechanism

Solvent-Free Synthesis of Zeolites from Anhydrous Starting Raw Solids

Synthesis of Kalsilite from Microcline Powder by an Alkali-Hydrothermal Process