Abstract:Separating azeotropic organic-organic mixtures using membranes is of great importance in the chemical and petrochemical industries, but remains extremely challenging because membranes must be able to withstand harsh working conditions while providing adequate permselectivity. Silicon carbide (SiC)-based membranes have attracted a great deal of interest due to their high level of structural stability, mechanical strength, and corrosion resistance. Herein is an account of the first study focused on a systematic investigation into the physicochemical and pore structural variations of polycarbosilane (PCS)-derived SiC-based membranes under different air-curing and pyrolysis temperatures. Air curing for cross-linking behavior was found to occur at temperatures as low as 150 °C, and the completion of polymer-to-ceramic conversion for PCS was observed at 750 °C. In addition, the pore structure and surface properties (hydrophilicity/hydrophobicity) of PCS membranes could be tuned by the pyrolysis temperature. PCS membranes derived from air curing at a temperature as low as 150 °C possessed sub-nanopores that ranged from 0.5 to 0.66 nm depending on the pyrolysis temperature. The formation of these sub-nanopores was attributed to sparsely cross-linked networks. Subsequently, the pervaporation (PV) performance of methanol/methyl acetate, methanol/toluene, and methanol/methyl tert-butyl ether were evaluated and discussed with respect to any effects of different pore sizes of the membranes and operating parameters. The most outstanding separation performance emerged from SiC-based membranes with a pore size of 0.50 nm that were air-cured at 150 °C and then pyrolyzed at 750 °C. The impressive PV separation capability was attributed to the surface hydrophilicity, suitable pore size, and high quality of the SiC-based membranes. Furthermore, the PV performance correlated well with single-gas permeation, suggesting that PV performance could be predicted based on single-gas permeation. The developed SiC-based membranes have excellent separation performance and are a promising candidate for the PV separation of MeOH from organic mixture systems.

In Situ Crosslinking and Micro-Cavity Generation in Fabrication of Polymeric Membranes for Pervaporation Dehydration on Methanol Aqueous Solutions

Study on Pervaporation Membranes for Removing Methanol from C 5 or Methyl Tert-butyl Ether Mixtures

Vtos Cross-Linked Pdms Membranes for Recovery of Ethanol from Aqueous Solution by Pervaporation

Preparation and Pervaporation of A Palygorskite/Polyacrylamide Inorganic-Organic Hybrid Membrane for Separating M-/P-Xylene Isomers

Crosslinked Polybenzoxazine Based Membrane Exhibiting In-Situ Self-Promoted Separation Performance for Pervaporation Dehydration on Isopropanol Aqueous Solutions

Pervaporation Separation of Ethanol from Aqueous Solution by PDMS Membranes Crosslinked with VTES

Glycopolymer-filled Microporous Polypropylene Membranes for Pervaporation Dehydration

Crosslinked poly(vinyl alcohol) membranes for separation of dimethyl carbonate/methanol mixtures by pervaporation

Microporous Polypropylene Hollow Fiber Membranes Part Ii. Pervaporation Separation of Water/Ethanol Mixtures by the Poly(Acrylic Acid) Grafted Membranes

A Poly(ionic Liquid) Complex Membrane for Pervaporation Dehydration of Acidic Water-Isopropanol Mixtures

Pervaporative Dehydration of Methanol Using PVA/Nanoclay Mixed Matrix Membranes: Experiments and Modeling

Effect of crosslinker 3-methacryloxypropylmethyldimethoxysilane on UV-crosslinked PDMS-PTFPMS block copolymer membranes for ethanol pervaporation

Construction of MoS2 hybrid membranes on ceramic hollow fibers for efficient dehydration of isopropanol solution via pervaporation

Pervaporation Properties of Pdms Membranes Cured with Different Cross-Linking Reagents for Ethanol Concentration from Aqueous Solutions

PPMS Composite Membranes for the Concentration of Organics from Aqueous Solutions by Pervaporation

Separation of Dimethyl Carbonate/Methanol Mixtures by Pervaporation with Poly(Acrylic Acid)/Poly(Vinyl Alcohol) Blend Membranes

Pervaporation Performances of Polydimethylsiloxane Membranes for Separating Dimethyl Carbonate/methanol Mixtures

New Hybrid Membrane Based on Poly(m-phenylene-iso-phthalamide) for Pervaporation of Methanol/n-Heptane Azeotropic Mixture

Low-temperature cross-linking fabrication of sub-nanoporous SiC-based membranes for application to the pervaporation removal of methanol

POSS/PDMS MMMs with Reversal Trade-off Effect: Characterization and Enhanced Permeation Flux

Modified MCM‐41 Silica Spheres Filled Polydimethylsiloxane Membrane for Dimethylcarbonate/methanol Separation Via Pervaporation