Bucket Effect: A Metal–Organic Framework Derived High-Performance FeS 2 /Fe 2 O 3 @S-rGO Negative Material for Enhanced Overall Supercapacitor Capacitance
Ranran Bu,Ying Deng,Yonglong Wang,Yu Zhao,Qiqi Shi,Qi Zhang,Zhenyu Xiao,Yanyan Li,Wei Sun,Lei Wang
DOI: https://doi.org/10.1021/acsaem.1c01952
IF: 6.4
2021-10-14
ACS Applied Energy Materials
Abstract:Over the past decades, great achievements of supercapacitor positive electrode materials have been developed, but the exploration of negative electrode materials is obviously lagging and mainly focuses on low-capacity electrochemical double-layer capacitor-based carbon materials (≤300 F g–1, commonly), which limits the overall capacitance of supercapacitor devices for further application. In this work, using the gifted as a precursor, we fabricate a FeS2/Fe2O3 heterostructure-coupled S-functionalized 3D rGO network (FeS2/Fe2O3@S-rGO) by a diffusion-controlled etching and vulcanizing process. The formation of heterogeneous interfaces and the strongly coupled interaction between the FeS2/Fe2O3 heterostructure and 3D S-rGO can provide high surface area for more electrochemical active sites, a rich pathway for the rapid transmission of the electron and electrolyte, and effectively alleviate the volume variation in the charging and discharging process. Therefore, the as-obtained FeS2/Fe2O3@S-rGO presents an outstanding capacity of 219.4 mA h g–1 (790 F g–1) at a current density of 2 A g–1, which is higher than that of most reported Fe-based negative materials. Then, a positive electrode of hierarchical 2D/3D Ni3S2/Co3S4 (NCS) is prepared and further fabricated with a FeS2/Fe2O3@S-rGO electrode to obtain a hybrid supercapacitor device (NCS//FeS2/Fe2O3@S-rGO), which delivers an outstanding overall capacitance value of 114.2 mA h g–1 (274 F g–1) at 1 A g–1 and provides a remarkable energy density of 85.63 Wh kg–1 corresponding to a power density of 0.75 kW kg–1.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01952.XRD patterns of MIL-88A and , XRD patterns of FeS2/Fe2O3, XPS full spectrum, O 1s of the FeS2/Fe2O3@S-rGO, and Fe 2p of the FeS2/Fe2O3@S-rGO-50, SEM image of MIL-88A, HRTEM image of MIL-88A, CV curves of the FeS2/Fe2O3@S-rGO electrode at different scan rates, corresponding log(i) versus log(v) fitting line of FeS2/Fe2O3@S-rGO, CV curves and galvanostatic discharge curves of , FeS2/Fe2O3@S-rGO-50, and FeS2@S-rGO, CV curves and galvanostatic discharge curves of FeS2/Fe2O3, FeS2/Fe2O3@S-rGO-3%, and FeS2/Fe2O3@S-rGO-8%, specific capacity of FeS2/Fe2O3, FeS2/Fe2O3@S-rGO-3%, FeS2/Fe2O3@S-rGO, and FeS2/Fe2O3@S-rGO-8% at different current densities, CV curves of the HCS device at different potential windows at 10 mV s–1, demonstration of an electric fan driven by one NCS//FeS2/Fe2O3@S-rGO HSC device, LED lighting by two NCS//FeS2/Fe2O3@S-rGO HSC devices connected in series, influence of the molar ratio of FeS2 and Fe2O3 on specific capacity of different samples, and parameters of the proposed equivalent circuit model of different samples (PDF)This article has not yet been cited by other publications.
materials science, multidisciplinary,chemistry, physical,energy & fuels