Abstract:The aim of this research is to find a way to achieve the epoxy composites with both high thermal conductivity and acceptable dielectric breakdown (BD) strength. As high thermal conductivity, low permittivity and low thermal expansion coefficient of filler can endow composite with higher thermal conductivity, higher BD strength and lower thermal expansion coefficient respectively, BN (boron nitride) with high thermal conductivity, low permittivity and low thermal expansion coefficient was adopted as main filler in the research. Thermal conductivity was investigated in this part. The BD strength of samples will be discussed in Part II. Neat epoxy and other 25 kinds of epoxy/BN composites were prepared by a hot press method. Most of BN fillers were surface modified with silane coupling agent through ethanol/water reflux method to improve thermal conductivity. The values of 2.91 W/m·K, 3.95 W/m·K and 10.1 W/m·K as thermal conductivity were obtained for the composites that was single-loaded with h-BN(hexagonal boron nitride), c-BN (cubic boron nitride) or conglomerated h-BN, respectively. They were further improved to 5.26 W/m·K, 5.94 W/m·K and 12.3 W/m·K, respectively, by adding extra smaller A1N (aluminum nitride) to fill the voids in sample. Thermal conductivity of samples changes with the ratio of c-BN and h-BN when c-BN and h-BN were co-loaded. A value of 5.74 W/m·K as maximum was obtained at their ratio of 1 to 1 when total filler content is 80 wt%. A much higher value of 7.69 W/m·K was obtained by adding extra AIN. From the experiment data, it is concluded that the filler orientation in vertical direction of sample surface and the decrease of voids in sample are very important to obtain high thermal conductivity, and that the filler surface modification is also necessary to improve thermal conductivity especially for epoxy/c-BN composites, and addition of nano silica in small amount can also increase thermal conductivity if sample is prepared appropriately.

Self-healing, Recoverable Epoxy Elastomers and Their Composites with Desirable Thermal Conductivities by Incorporating BN Fillers Via In-Situ Polymerization

Improving Thermal Conductivity of Epoxy Resin by Filling Boron Nitride Nanomaterials: A Molecular Dynamics Investigation

A Self-Healing Silicone/bn Composite with Efficient Healing Property and Improved Thermal Conductivities

High thermal conductivity of self‐healing polydimethylsiloxane elastomer composites by the orientation of boron nitride nano sheets

Highly thermoconductive yet ultraflexible polymer composites with superior mechanical properties and autonomous self-healing functionality via a binary filler strategy

Achieving High Thermal Conductivity and Satisfactory Insulating Properties of Elastomer Composites by Self-Assembling BN@GO Hybrids

Mechanical property-enhanced thermally conductive self-healing composites: preparation using designed self-healing matrix phase and hyBNNSs

Self-healing Epoxy Composite with Heat-Resistant Healant.

Thermally Conductive Elastomer Composites with Poly(catechol-polyamine)-Modified Boron Nitride

Self‐healable and reprocessible liquid crystalline elastomer and its highly thermal conductive composites by incorporating graphene via in‐situ polymerization

Development of epoxy/BN composites with high thermal conductivity and sufficient dielectric breakdown strength partI - sample preparations and thermal conductivity

Increase in Properties and Self-Healing Ability of Conductive Butyl Rubber/Epoxidized Natural Rubber Composites by Using Bis(triethoxysilylpropyl)tetrasulfide Coupling Agent

Enhancing thermal conductivity of epoxy composites via f-BN@f-MgO hybrid fillers assisted by hot pressing

A nacre-inspired thermo conductive and healable nanocomposite captures extremely enhanced stiffness and toughness

Enhanced Thermal Conductivities of Epoxy Nanocomposites Via Incorporating In-Situ Fabricated Hetero-Structured SiC-BNNS Fillers

Recyclable and Elastic Highly Thermally Conductive Epoxy-based Composite with Covalent-Noncovalent Interpenetrating Network

Self-healable, reprocessable and anti-flammable eugenol-derived covalent adaptable thermosets based on dynamic covalent boronic esters and thiol-ene click chemistry

Coating Polyrhodanine Onto Boron Nitride Nanosheets for Thermally Conductive Elastomer Composites

Preparation of highly thermally conductive epoxy resin composites via hollow boron nitride microbeads with segregated structure

Synchronously enhancing thermal conductivity and dielectric properties in epoxy composites via incorporation of functionalized boron nitride

Thermally Conductive and Stretchable Elastomers Engineered via Ordered Hydrogen Bonding Interactions