Abstract:A dynamic model of a multi-unit air conditioning (AC) system in a generic bus was developed to investigate different control strategies on the system performance and the cabin comfort level. In this study, a part-load condition was considered, where adopting a proper strategy for governing a multi-unit system is important. Simulink and Simscape toolbox from MATLAB (R2019a) were used to build up the real-time model by integrating a cooling system with a cabin sub-model. The cooling system consists of two independently controlled units, based on a Vapor Compression Cycle (VCC). The cabin is modelled using a moisture air network and is coupled with the cooling system to exchange heat with the refrigerant through the evaporators. Moreover, the sensible and latent loads are incorporated into the cabin by a thermal network. Six different strategies were implemented using different criteria to investigate the average power and Coefficient of Performance (COP) under a part-load condition. The comfort level was obtained in terms of the Predicted Mean Vote (PMV) and Predicted Percentage of Dissatisfied (PPD) indices. Results are suggestive of a link between the implemented control strategy of a multi-unit AC system and its performance. Results showed that five out of the six proposed strategies might be chosen, depending on the adopted trade-off policy between the comfort level and the system energy demand. In this way, the numerical approach introduced here, along with the combination of the presented findings, provides good support for the decision-making on thermal management inside the cabin, based on the energy consumption and the thermal comfort level.

Modeling and Analysis in Air Conditioning Control System Based on Electric Bus

Load Modeling Including Air Conditioners

Simplified Modeling of an Inverter Air Conditioner Based on Experimental Data

Dynamic Characteristics and Modeling of Air Conditioner Loads

Simulation and Modeling of Blended Constant-Frequency and Variable-Frequency Air-Conditioner

Feasibility Study on the Characterization of Electric Load including Inverter Air Conditioner with a Synthetic Load Model

Simulation Of Electric Vehicle Air Conditioning System And Optimization Of Algorithm

Steady-State Performance Prediction for a Variable Speed Direct Expansion Air Conditioning System Using a White-Box Based Modeling Approach

Research on Simulation Models of Air Conditioning System

Dynamic Modelling and Performance Prediction of a Multi-unit Baseline Air Conditioning System for a Generic Bus under Part-Load Conditions

Modelling and Optimal Energy-Saving Control of Automotive Air-Conditioning and Refrigeration Systems

A Hybrid Dynamical Modelling and Control Approach for Energy Saving of Central Air Conditioning

Simulation and control of bus conditioner for a power distribution system of More Electric Aircraft

Modeling and Control in Air-conditioning Systems

Model Predictive Control of the Air-conditioning System for Electric Bus

Construction and analysis of a district heating / cooling network system based on thermal bus

Simulation and Optimization for the Battery Pack Cooling System on Hybrid Electric Bus

Research and Development of Pure Electric Vehicle Air-Conditioning Controller Based on Fuzzy Control Algorithm

Multi-Parameter Analysis of Influences of Air Conditioning Systems on Electric Vehicle

THE TEMPERATURE CALCULATION AND ANALYSIS OF THE LONG VERTICAL BUSES

Simulation and Control System Optimization of Pure Electric Vehicle Air Conditioning System Based on Multi-Objective Genetic Algorithm