Abstract:Dispersion nuclear fuel elements have promising prospects to be used in advanced nuclear reactors and disposal of nuclear wastes. They consist of fuel meat and cladding, and the fuel meat is a kind of composite fuel in which the fuel particles are embedded in the non-fissile matrix. Prediction of the micro-thermo-mechanical behaviors in dispersion nuclear plates is of importance to their irradiation safety and optimal design. In this study, the heterogeneity of the fuel particles along the thickness direction in the fuel meat is considered. The 3D finite element models have been developed respectively for two cases: (1) variation of fuel particle-particle (PP) distances for the particles near the mid-plane of the fuel meat; (2) variation of the particle-cladding (PC) distances for the fuel particles near the interface between the fuel meat and the cladding. The respective finite strain constitutive relations are developed for the fuel particle, metal matrix and cladding. The developed virtual temperature method is used to simulate irradiation swelling of the fuel particles and irradiation growth of the metal cladding. Effects of the heterogeneous distributions of the fuel particles on the micro temperature fields and the micro stress-strain fields are investigated. The obtained results indicate that: (1) as a whole, the maximum Mises stress, equivalent plastic strain and first principal stress at the matrix between the two closest particles increase with decreasing the particle-particle (PP) distance; existence of large first principal stresses there may be the main factor that induces the matrix failure; (2) variation of the particle-cladding (PC) distance has remarkable effects on the interfacial normal stress and shear stress at the interface between the fuel meat and the cladding; the first principal stress at the cladding near the interface increases dramatically when the fuel particle is closer and closer to the cladding. Thus, the proper distance between the fuel particles and the one between the fuel particle and the cladding should be considered in the optimal design; (3) the micro temperature distribution in the fuel element is hardly affected. (C) 2011 Elsevier B.V. All rights reserved.

Development of Effective Thermal Conductivity Model for Particle-Type Nuclear Fuels Randomly Distributed in a Matrix

Numerical Analysis of Effective Thermal Conductivity of FCM with Multilayer TRISO Particle

Finite Element Modeling of Thermal-Mechanical Behaviors of Dispersion Fuel Elements

Heat Transfer Performance of the Solid Microencapsulated Fuel in Light Water Reactors

Prediction of the Micro-Thermo-mechanical Behaviors in Dispersion Nuclear Fuel Plates with Heterogeneous Particle Distributions

Modeling of the Heat Transfer Performance of Plate-Type Dispersion Nuclear Fuel Elements

Irradiation-Thermal-Mechanical Coupling Behaviors of a Typical TRISO/SiC Fuel Element Based on Actual Distribution

Modeling of irradiation-induced thermo-mechanical coupling behavior in metal matrix microencapsulated fuel

Modeling of Irradiation-Induced Thermo-Mechanical Coupling and Multi-Scale Behavior in a Fully Ceramic-Microencapsulated Fuel Pellet

Neutronic and Thermal-Fluidic Analyses for an Additive Manufactured Reactor with SiC Matrix and TRISO Particle Fuel

Research on the ODR-VS Method Applicable to Various Geometric Models

Effects of Particle Volume Fraction on the Macro-Thermo-Mechanical Behaviors in Plate-Type Dispersion Nuclear Fuel Elements

Multi-Objective Optimization Design of TRISO-based Fully Ceramic Microencapsulated Fuel

The Study of Irradiation-Induced Failure Behavior for the TRISO-coated Fuel Particle in HTGR

Effects of the Mesostructures and Irradiation Conditions on the Thermo-Mechanical Coupling Behaviors in LWR-used Fully Ceramic-Microencapsulated Fuel Pellets

Investigation on the Irradiation-thermal–mechanical Coupling Behaviors of the Solid Microencapsulated Fuel Rod

Modeling Effective Thermal Conductivity of Thermal Radiation for Nuclear Packed Pebble Beds

Effect of Fuel Meat Thickness on the Non-Uniform Irradiation-Induced Thermo-Mechanical Behavior in Monolithic UMo/Al Fuel Plates

A Matrix Model of Particle-Scale Radiative Heat Transfer in Structured and Randomly Packed Pebble Bed

Monte Carlo simulation of dispersed coated particles in accident tolerant fuel for innovative nuclear reactors

Effect of random distribution of coated particle fuel