Abstract:In this work, we used a flow method for measurement of critical properties of six binary mixtures (2-butanol + cyclohexane, 2-butanol + hexane, 2-butanol + heptane, 2-butanol + octane, 2-butanol + nonane and 2-butanol + decane) and two ternary mixtures (2-butanol + hexane + heptane and 2-butanol + octane + decane). The critical properties were determined by observing the disappearance and reappearance of the gas-liquid phase meniscus in a quartz glass tube. The standard uncertainties of temperatures and pressures for both binary and ternary mixtures were estimated to be less than 0.2 K and 5.2 kPa, respectively. These critical data provide the boundaries of the two-phase regions of the related mixture systems. Six binary systems show non-ideal behaviors in the loci of critical temperatures. We used the Redlich-Kister equations to correlate the critical temperatures and pressures of these systems and listed the binary interaction parameters. The maximum average absolute deviation (AAD) of each binary system between experimental data and calculated results from Redlich-Kister equations is 0.038% for critical temperatures, and 0.244% for critical pressures. Moreover, the two ternary systems were newly reported and correlated by Cibulka's and Singh's expressions. The maximum AAD of critical temperatures and critical pressures are 0.103% and 0.433%, respectively. (C) 2016 Elsevier Ltd.

Measurement of critical properties for binary and ternary mixtures containing potential gasoline additive diethyl carbonate (DEC)

Measurement of Critical Properties for Binary and Ternary Mixtures Containing N-Butanol and N-Alkane

Determination of Critical Properties for Binary and Ternary Mixtures Containing Dimethyl Carbonate and Alkanes

Measurement of the Critical Properties of the Ternary Systems Hexane + Heptane + Octane and Octane + Nonane + Decane Using a Flow Apparatus

Determination of Critical Properties for Binary and Ternary Mixtures of Short Chain Alcohols and Alkanes Using a Flow Apparatus

Measurement of Critical Temperature and Critical Pressure of Tert-Butanol and Alkane Mixtures

Experimental Determination of Critical Data of Multi-Component Mixtures Containing Potential Gasoline Additives 2-Butanol by a Flow-Type Apparatus

Densities and Viscosities for the Ternary System of Decalin + Methylcyclohexane + Cyclopentanol and Corresponding Binaries at T = 293.15 to 343.15 K

Isobaric Molar Heat Capacities of Dimethyl Carbonate and Alkane Binary Mixtures at High Pressures

Measuring and Modeling the Density of Some Typical Binary Mixtures in the Conditions of 280-423.15 K and 0.1-9 MPa

Density and Viscosity Measurements on the Ternary System of Exo-Tetrahydrodicyclopentadiene (1) + N-Decane (2) + Iso-Butanol (3) and Corresponding Binary Systems

Vapor pressures and flash points for binary mixtures of tricyclo [5.2.1.02.6] decane and dimethyl carbonate

The Critical Properties of Dimethyl Carbonate (DMC) + Alkanes Mixtures

Density, Viscosity, And Vapor Pressure For Binary Mixtures Of Tricyclo [5.2.1.0(2.6)] Decane And Diethyl Carbonate

Density, Viscosity, and Vapor Pressure for Binary Mixtures of Tricyclo [5.2.1.02.6] Decane and Diethyl Carbonate

Measurements of critical properties of ethyl propionate with the gasoline components

Density, Viscosity, and Freezing Point for Four Binary Systems of N-Dodecane or Methylcyclohexane Mixed with 1-Heptanol or Cyclohexylmethanol

Vapor Pressures And Flash Points For Binary Mixtures Of Tricyclo [5.2.1.0(2.6)] Decane And Dimethyl Carbonate

Densities, Viscosities, Refractive Indices, and Surface Tensions of Binary Mixtures of 2,2,4-Trimethylpentane with Several Alkylated Cyclohexanes from (293.15 to 343.15) K

Density, Viscosity, and Vapor Pressure for Binary Mixtures of Tricyclo [5.2.1.0<sup>2.6</sup>] Decane and Diethyl Carbonate

Densities and viscosities for the ternary system of cyclopropanemethanol (1) + 2, 2, 4-trimethylpentane (2) + decalin (3) and corresponding binaries at T = 293.15–323.15 K