Abstract:Blending high-permittivity (εr) ceramic powders or conductive fillers into polymers to form 0-3-type composites has been regarded as one of the most promising processes to achieve high-dielectric-permittivity materials with excellent processing performance. The high dielectric loss and conductivity induced by the interface between the matrix and fillers as well as the leakage current have long been a great challenge of dielectric composites, and the resolution of these challenges is still an open question. In this work, poly(vinylidenefluoride-trifluorethylene with double bonds)/graphene nanosheets (P(VDF-TrFE-DB)/GNS) terpolymer nanocomposites were fabricated via a solution-cast process. GNSs were functionalized with KH550 to improve the dispersion in the terpolymer matrix solution and crosslinked with P(VDF-TrFE-DB) by a free-radical addition reaction in the nanocomposites. Compared with neat terpolymer, significantly increased dielectric permittivity and a low loss were observed for the composites. For instance, at 1 kHz the P(VDF-TrFE-DB)/GNS composites with 4 vol % GNS possessed a dielectric permittivity of 74, which is over seven times larger than that of neat terpolymer. However, a rather low dielectric loss (0.08 at 1 kHz) and conductivity (3.47 × 10(-7) S/m at 1 kHz) are observed in the P(VDF-TrFE-DB)/GNS composites containing up to 12 vol % GNS. The covalent bonding constructed between P(VDF-TrFE-DB) and GNS is responsible for the reduced aspect ratio of the GNS and the crystalline properties of P(VDF-TrFE-DB) as well as the improved compatibility between them. As a result, the high-dielectric-loss conductivity of polymer composites, mainly induced by conduction loss and the interface polarization between the matrix and filler, were effectively restricted. Meanwhile, the 3D network established between P(VDF-TrFE-DB) and GNS endows the P(VDF-TrFE-DB)/GNS composites at high temperature with excellent mechanical and dielectric properties. Besides preparing high-performance dielectric composites, this facile route may also be utilized to fabricate high-performance nanocomposites by inhibiting the poor compatibility between fillers and polymeric matrix.

A new strategy for the preparation of silver/epoxy/poly(vinylidene fluoride) dielectric composites with a multi-interface structure for suppressed dielectric loss

Polymer/metal multi-layers structured composites: A route to high dielectric constant and suppressed dielectric loss

Dielectric Loss Suppression of Silver/Poly(vinylidene Fluoride) Composite Films with Polydopamine

Weak Epsilon-Negative Silver Nanowires/polyimide Metacomposites with Extremely Low Losses

Preparation and dielectric properties of silver@poly(vinyl pyrrolidone)/poly(vinylidene fluoride) composites

Percolative Ceramic Composites with Giant Dielectric Constants and Low Dielectric Losses

Chemical bonding-induced low dielectric loss and low conductivity in high-K poly(vinylidenefluoride-trifluorethylene)/graphene nanosheets nanocomposites.

Suppression of Energy Dissipation and Enhancement of Breakdown Strength in Ferroelectric Polymer–graphene Percolative Composites

Suppressed Dielectric Loss and Enhanced Thermal Conductivity in Poly(vinylidene Fluoride) Nanocomposites Using Polyethylene Glycol-Grafted Graphene Oxide

Enhanced high permittivity and lowed dielectric loss in cellulose-fiber framework polymer microcomposites

Graphene/poly(vinylidene Fluoride) Dielectric Composites with Polydopamine As Interface Layers

Fluoro-polymer functionalized graphene for flexible ferroelectric polymer-based high-k nanocomposites with suppressed dielectric loss and low percolation threshold.

Interface modified Si@SiO<sub>2</sub>/PVDF composite dielectrics with synchronously ameliorative dielectric and mechanical properties

Low‐loss percolative epsilon‐negative composites derived from the ultra‐low percolation threshold

Self-Assembled MXene@Fluorographene Hybrid for High Dielectric Constant and Low Loss Ferroelectric Polymer Composite Films

Towards inhibiting conductivity of Mo/PVDF composites through building MoO 3 shell as an interlayer for enhanced dielectric properties

Towards inhibiting conductivity of Mo/PVDF composites through building MoO3 shell as an interlayer for enhanced dielectric properties

Poly(vinyl pyrrolidone)-coated graphene/poly(vinylidene fluoride) composite films with high dielectric permittivity and low loss

Inserting insulating barriers into conductive particle channels: A new paradigm for fabricating polymer composites with high dielectric permittivity and low dielectric loss

Remarkably enhancing dielectric permittivity and suppressing loss of PVDF via incorporating metal nanoparticles decorated glass fibers

High Dielectric Permittivity and Low Loss of Polyvinylidene Fluoride Filled with Carbon Additives: Expanded Graphite Versus Reduced Graphene Oxide