Abstract:Adipic acid (AA) production from petroleum-based cyclohexane is one of the largest chemical processes in terms of annual volumetric turnover accounting for 3 million tons as of 2022. The current commercial approach to synthesize AA is through the oxidation of petroleum-derived cyclohexane using nitric acid. The release of N 2 O in stoichiometric amounts makes it one of the most significant greenhouse gas (GhG) emitting processes. The abundance of biomass in the Midwestern United States has driven significant research efforts to synthesize bio-derived and sustainable commodity products and lower the chemical industry’s carbon footprint. 1 cis,cis -Muconic acid ( cc MA), a biobased C6 diunsaturated diacid platform molecule can be transformed to commodity chemicals like caprolactam, adipic acid, and terephthalic acid, with AA being of particular interest for the synthesis of nylon 6,6. 2 For the first time in literature, we demonstrate appreciable production of AA (conversion: 91%, selectivity: >95%) through electrochemical hydrogenation (ECH) of cc MA on PGM catalysts. Carbon-supported palladium (Pd/C) and platinum (Pt/C) selectively produced AA while bulk Pd and Pt yielded the monounsaturated trans -3-hexenedioic acid ( t 3HDA) intermediate and H 2 under all tested conditions. Such an influence of surface structure on the electrochemistry of organics is not unprecedented. Koper et. al 3 studied Pt single crystals for the electrochemical hydrogenation of acetone and showed how activity, selectivity, and extent of catalytic poisoning are highly sensitive to the Pt surface structure. Similarly, we used density functional calculations to elucidate the structure-sensitive nature of cc MA ECH and its intermediates by identifying thermodynamically preferred reaction pathways as a function of surface geometry (terrace vs steps). The energetics coupled with experimental observations suggest that the reduction of cc MA to t 3HDA occurs through an outer sphere proton-coupled electron transfer mechanism, while the reduction of HDA to AA preferentially occurs on Pd and Pt (111), the most abundant facet in Pd/C and Pt/C. Our calculations also explain the exceptional performance of Pd/C compared to Pt/C by the weaker binding of Pd terrace sites compared to Pt. Overall, combining renewable electricity, in-situ hydrogen generation from water, and a biologically-produced intermediate enabled us to open a sustainable route for bio-adipic acid production. This allows us to further design and optimize the catalyst for the selective production of biobased AA. References: (1) Dell’Anna, M. N. et al . Green Chem. 23 , 6456–6468 (2021). (2) Matthiesen, J. E. et al. ACS Sustain. Chem. Eng . 4 , 3575–3585 (2016). (3) Bondue, C. J. et al. Nat Catal . 2 , 243-250 (2019) Figure 1

Adipic Acid Production Catalyzed by a Combination of a Solid Acid and an Iodide Salt from Biomass-Derived Tetrahydrofuran-2,5-dicarboxylic Acid

Adipic Acid Production Via Metal-Free Selective Hydrogenolysis of Biomass-Derived Tetrahydrofuran-2,5-Dicarboxylic Acid

Synthesis of 1,1-Cyclohexanediacetic Acid Catalyzed by Dilute Sulfuric Acid in High-Temperature Liquid Water

Sustainable Adipic Acid Production via Paired Electrolysis of Lignin-Derived Phenolic Compounds with Water as Hydrogen and Oxygen Sources

Production of Adipic Acid Derivatives from D -Glucaric Acid by Hydrodeoxygenation Mediated with Hydroiodic Acid

Direct Synthesis of Α,ω-Dicarboxylic Acids Via Dicarbonylation of Cyclic Ethers

Highly Efficient One-Pot Aerobic Oxidation of Cyclohexane to Adipic Acid Using Task-Specific Metal-Based Ionic Liquid

Electrocatalytic synthesis of adipic acid coupled with H2 production enhanced by a ligand modification strategy

Highly Efficient Chemical Process to Convert Mucic Acid into Adipic Acid and DFT Studies of the Mechanism of the Rhenium‐Catalyzed Deoxydehydration

Efficient hydrodeoxygenation of tetrahydrofuran 2,5-dicarboxylic acid to adipic acid over Pt-MO x catalysts: An experimental and computational study

Production of Adipic Acid from Sugar Beet Residue by Combined Biological and Chemical Catalysis

Catalytic Transformation of 2,5-Furandicarboxylic Acid to Adipic Acid over Niobic Acid-Supported Pt Nanoparticles.

Biosynthesis of adipic acid in metabolically engineered Saccharomyces cerevisiae

Acetalization of Carbonyl Compounds with 2,2,4-Trimethyl-1,3-pentanedio Catalyzed by Novel Carbon Based Solid Acid Catalyst

A facile process for adipic acid production in high yield by oxidation of 1,6-hexanediol using the resting cells of Gluconobacter oxydans

Renewable Production of Nylon-6,6 Monomers from Biomass-Derived 5-Hydroxymethylfurfural (Hmf)

Influence of Catalyst Surface Structure on the Electrochemical Hydrogenation of Cis,Cis-Muconic Acid

One-Pot Biocatalytic Transformation of Adipic Acid to 6-Aminocaproic Acid and 1,6-Hexamethylenediamine Using Carboxylic Acid Reductases and Transaminases

Sustainable Routes for the Synthesis of Renewable Adipic Acid from Biomass Derivatives

Highly Dispersed Metal Incorporated Hexagonal Mesoporous Silicates for Catalytic Cyclohexanone Oxidation to Adipic Acid

Electrosynthesis of adipic acid with high faradaic efficiency within a wide potential window