Abstract:The development of the telescope with large aperture is driven by the increasing demand for higher imaging resolution and imaging area. The large membrane diffraction space telescope is particularly attractive due to their lightweight nature, ease of folding and unfolding, and high precision imaging capabilities. However, the flexible and large structure of these telescope makes them prone to long-time, low-frequency vibrations in space. These vibrations can degrade the imaging quality and potentially cause damage to the instrument in the space telescope. Therefore, it is crucial to develop effective active vibration control methods to suppress these structural vibrations. This paper proposes a control method that utilizes cables as actuators. Since cables can only withstand tension and have limited output tension, this constraint is taken into account during the control design process. Firstly, a dynamics model of the membrane diffraction space telescope with hinge flexibility is developed by the beam theory and finite element method. Next, an active controller is designed by combining H∞ control theory and Linear Matrix Inequalities (LMI). Additionally, the optimal positions of cable actuators are determined using the Gram controllability criterion and a particle swarm algorithm. Finally, the effectiveness of the control method is verified through numerical simulations. The simulation results demonstrate that the hinge flexibility significantly influences the structural vibration behavior of the telescope. Furthermore, the proposed control method demonstrates the ability to effectively suppress the vibrations of the telescope while also exhibiting robustness to changes in natural frequencies of the structure.

Mechanisms for the Elevation Structure of a Giant Telescope

Design Conception and Deployment Simulation for a Highly Synchronized Extendable/Retractable Space Mast

Model Design for Adjustment Mechanism of Imaging Lens's Focal Length of Space Solar Telescope

Kinematic Analysis and Model Fabrication of a Space Deployable Optical Baffle

Static Stiffness and Dynamic Step Response Analysis of a Hydraulic Support System

MODIFIED DESIGN AND STRUCTURAL ANALYSIS FOR ADJUSTMENT MECHANISM OF THE IMAGING LENS'S FOCAL LENGTH OF A SPACE SOLAR TELESCOPE

Structural Design and Static Analysis of a Double-Ring Deployable Truss for Mesh Antennas

Posture optimization of a 3-6R parallel mechanism for secondary mirror truss applied on large telescopes

Motion Analysis of a 3-DOF parallel support for the telescope's secondary mirror

Research on Degree of Freedom of Secondary Mirror Truss Mechanism Based on Screw Theory and Geometry Algebra Applied on Large Telescopes

A Novel Hybrid Actuation Mechanism Based XY Nanopositioning Stage with Totally Decoupled Kinematics

The Vertical Adjustment System with Angle Closed Loop Control for TBM

The Development of a High-Speed Segment Erecting System for Shield Tunneling Machine

Design and assessment of a micro-nano positioning hexapod platform with flexure hinges for large aperture telescopes

Study on Telescope Gain Affected by a Multilevel Hybrid Mechanism in FAST

Design, fabrication, and evaluation of a passive deployment mechanism for deployable space telescope

Active Vibration Control of a Large Space Telescope Based On H∞ Control With Unilateral and Constrained Input

Semi-Kinematic Coupling Design and Analysis for Giant Steerable Science Mirror Prototype of Thirty Meter Telescope

Multimaterial homologous topology optimization of large telescope structure under multiple elevation conditions

Kinematics Analysis of Active Reflector Supporting Mechanism for FAST

Experimental Study and Theoretic Analysis of the Structure for Supporting the Feed Cabin of the FAST