Abstract:Active flow control, which has great application prospects in aerodynamic design, can restrain flow separation and reduce drag. This paper provides a review on our works relating to the China–EU MARS research project. Backward-facing step (BFS) flow, with sudden expansion of cross-section and complex vortices between the free stream and the main vortex, is a typical kind of separated flow. Synthetic jet, which transports momentum with zero net mass flux and affects structure of the flow field with length scales higher than its characteristic length scales, is applied to control BFS flow field. The optimization processes for the backward-facing step flow control with synthetic jet based on both numerical simulation and experimental data are introduced. In the numerical simulation aspect, experimental and computational data are synthesized and a computational model is proposed based on physical characteristics of wind tunnel. An adaptive double stage surrogate model based optimization framework is constructed and applied to optimize parameters of the synthetic jet. Two optimal schemes with similar control effects are obtained through design optimization based on computational data, revealing two inherently different flow control mechanisms. Pressure coefficient, skin friction and Reynolds stress of the two schemes are compared and analyzed. The flow control scheme for one problem based on Reynolds stress may not be definite. In the experimental aspect, the synthetic jet device has non-linear oscillation of reciprocating piston actuator into a pipe and can eject/suck mass flux through a jet slot. An in-looped design optimization system based on experimental data adopting hybrid searching algorithm is constructed and applied to optimize parameters of the synthetic jet. Then, power consumed in driving reciprocator is considered to derive a multi-objective optimum scheme. Flow control mechanism of synthetic jet device is preliminarily revealed, with theoretical and experimental data analysis of velocity profiles and Reynolds stress distributions. The optimization process and the analysis of optimum state provide guidance to the design of active flow control devices.

Characteristics of a Synthetic Jet Actuator and Its Application on Control of Flow over a Backward Facing Step

Lift Augmentation Potential of the Circulation Control Wing Driven by Sweeping Jets

Analysis Of Synthetic Jet Piv Experiment Based On Dynamic Mode Decomposition

Lattice Boltzmann Modeling of Backward-Facing Step Flow Controlled by a Synthetic Jet

Active Flow Control in an S-shaped Duct at Mach 0.4 Using Sweeping Jet Actuators

An Experimental Study on Turbulent Boundary Layer Flow Control by Synthetic Jet through Spanwise Slot

The Optimization for the Backward-Facing Step Flow Control with Synthetic Jet Based on Experiment

The Optimization of Reynolds Stress Flow Control for the Backward-Facing Step with Synthetic Jet Based on Numerical Simulation and Test

Investigating The Flow Control Over A Backward-Facing Step By Right-Angle-Shaped Plasma Actuator

Numerical simulation investigation on the suction stroke and blowing stroke of synthetic jet circulation control

Design of an Acoustic Synthetic Jet Actuator for Flow Control

Numerical Investigation of a Sweeping Jet Actuator for Active Flow Control in a Compressor Cascade

Active Flow Control on A Highly Loaded Compressor Stator Cascade with Synthetic Jets

Design and fabrication of a Piezoelectric Micro Synthetic Jet Actuator.

Corner Separation Control Using Sweeping Jet Actuator in a Compressor Cascade

Study on propagation mechanisms of the actuations generated by plasma synthetic jet actuator in a supersonic flow

Effects of a Sweeping Jet Actuator on Aerodynamic Performance in a Linear Turbine Cascade with Tip Clearance

Modulation of driving signals in flow control over an airfoil with synthetic jet

Experimental Characterization of a Supersonic Flow Control Actuator

ADVANCES IN SYNTHETIC JET TECHNOLOGY AND APPLICATIONS IN FLOW CONTROL

Numerical Simulation Investigation on Parameters Influencing Synthetic-Jet for Active Flow Control