Abstract:The plasmonic phase‐change material In3SbTe2 can be reversibly switched from an amorphous dielectric to a crystalline metallic state. Infrared emissivity control by patterning a grating absorber metasurface for different polarizations, which can be only seen in the long‐wave infrared (LWIR) regime, is demonstrated. Additionally, a 1 × 1 cm2 metasurface is fabricated with enhanced emissivity to display an apparent local temperature pattern. Metasurfaces with perfect infrared absorption promise integrated filters and compact detector elements with narrowband thermal emission. Phase‐change materials (PCMs) are prime candidates for active, non‐volatile absorption tuning. Commonly, the response of the entire metasurface is tuned, while local adaptions remain elusive. In this work, flexible encoding of different absorption/emission properties within a metasurface is shown. The plasmonic PCM In3SbTe2 (IST) is employed to obtain control over the emissivity by patterning an adaptable grating absorber metasurface. Using a commercial direct laser writing setup, the IST is locally switched from an amorphous dielectric into a crystalline metallic state, and cm‐sized stripe gratings are written above a reflecting mirror. Modification of already written patterns is demonstrated by changing the laser power and thus the IST stripe width to encode different polarization‐sensitive patterns with nearly perfect absorption into the same metasurface. Finally, an apparent local temperature pattern due to the large‐area emissivity shaping metasurface is measured with a conventional thermal camera. The results pave the way towards low‐cost, large‐area, and adaptable patterning of metasurfaces with wavelength and polarization‐selective perfect absorption, enabling applications like enhanced thermal detection, infrared camouflage, or encoding anti‐counterfeiting symbols.

Tunable Mid-Infrared Phase-Change Metasurface

All-optical continuous tuning of phase-change plasmonic metasurfaces for multispectral thermal imaging

Tunable doublet lens based on dielectric metasurface using phase-change material

Tunable Metasurfaces Based on Phase-Change Materials

Non-polarized and Ultra-Narrow Band Filter in MIR Based on Multilayer Metasurface

Nonlinear Mid-infrared Metasurface based on a Phase-Change Material

Phase change induced active metasurface devices for dynamic wavefront control

Numerical Study of Mid-Infrared Tunable Metalenses Based on Ge2Sb2Te5 Phase-Change Material

High-efficiency Mid-Infrared Transmissive Huygens Dielectric Metasurface

Tunable wavefront control in the visible spectrum using low-loss chalcogenide phase change metasurfaces

Tuneable Thermal Emission Using Chalcogenide Metasurface

Hybrid All-Dielectric Phase-Change Metasurfaces for Tunable Waveplate

Reconfigurable and Polarization‐Dependent Grating Absorber for Large‐Area Emissivity Control Based on the Plasmonic Phase‐Change Material In3SbTe2

All-optical tuning of EIT-like dielectric metasurfaces by means of chalcogenide phase change materials

A 0.67 THz Tunable Meta-surface Filter by Phase Change Medium

Phase-Change Metasurface by U-Shaped Atoms for Photonic Switch with High Contrast Ratio

Tunable Narrowband Shortwave-Infrared Absorber Made of a Nanodisk-Based Metasurface and a Phase-Change Material Ge2Sb2Te5 Layer

Near-infrared tunable metalens based on phase change material Ge 2 Sb 2 Te 5

Plasmonic Metamaterial Using Metal-Insulator-metal Nanogratings for High-Sensitive Refraction Index Sensor

Near-Infrared Tunable Metalens Based On Phase Change Material Ge2se2te5

Tunable mid-wave infrared Fabry-Perot bandpass filters using phase-change GeSbTe