Abstract:For decades, researchers have struggled to solve 6-axis robotic vibration while machining hard-to-cut materials. On the other hand, wire electric discharge machining (WEDM) stands out as a non-conventional machining process able to cut large and complex profiles of any conductive hard-to-cut material with minor non-contact forces. Thus, WEDM is a promising process to be combined into a robot to overcome vibration and low accuracy. However, the robot characteristics of a high degree of freedom combined with payload limitation oblige to separate the heavy wire winding system from the robot end-effector, demanding an equally high degree of freedom and unconventional solutions to feed and control the wire electrode. This study designs and reports experimental findings of the first robotic WEDM apparatus based on a high-speed winding system with 600 m of wire length, capable of controlling the wire speed from 1 to 10 m/s and wire tension from 0.1 to 10 N. The system adopts flexible outer cases to travel and reciprocate the wire into a 7-axis robotic system composed of a 6-axis robot and an external rotating axis. The proposed design is a highly dynamic process whose wire tension and speed are achieved by a hybrid controller to cope with the non-linear relation of speed and tension provided by the magnetic clutch. It combines a regression open-loop control for optimality and wire breakage avoidance with a closed-loop control to guarantee admissibility while coping with wire friction disturbances. The findings review a novel wire winding system capable of controlling usual wire disturbance and stepped surface of reciprocating high-speed WEDM as well as additional friction and elastic behaviour of the flexible case, delivering wire tension of ± 12% along with stable EDM process and uniform surface roughness between wire reciprocation areas with a Ra of 2.94 μm. Potential adoption of the method can finally make 6-axis robots a feasible and advantageous technique compared to computer numeric control (CNC) while shaping monolithic and complex workpieces of conductive and hard-to-cut materials.

Online Workpiece Height Estimation for Reciprocated Traveling Wire EDM Based on Support Vector Machine

Online Workpiece Height Estimation Method Based on Discharge Location Detection for Reciprocated Traveling WEDM

Online Estimation of Workpiece Height by Least Squares Support Vector Machines in Wire Electrical Discharge Machining

Workpiece Height Estimation in Wire Electrical Discharge Machining by Using Support Vector Regression

Online Estimation on Workpiece Height Based on Least Squares Support Vector Machine

Break-out Detection for High-Speed Small Hole Drilling EDM Based on Machine Learning

Study on Online Identification Technology of Workpiece Height in WEDM

Wedm Adaptive Control with A Multiple Input Model for Indentification of Workpiece Height

Wire Breakage Prevention for Reciprocated Traveling WEDM Based on Discharge Location Detection

Study on Online Estimation of Workpiece Height Based on Extreme Learning Machine

Study on Adaptive Servo Control Strategy of WEDM Based on Discharge State Detector

A new tool wear compensation method based on real-time estimation of material removal volume in micro-EDM

An investigation on machining large removal cylindrical parts using WEDM with contour approximation method

Kinematic Modeling and Error Analysis of Cradle-type WEDM

Breakthrough Detection Technology of High Speed EDM Drilling Based on Support Vector Machine

Control design of a reciprocating high-speed wire feed system for 7-axis robotic electric discharge machining

Feedrate planning for synchronized movements involving rotary axes in multi-axis EDM for shrouded blisks

Vibration-Assisted Servo Scanning 3d Micro Edm

An Analysis and Optimization of the Geometrical Inaccuracy in WEDM Rough Corner Cutting

Servo control for super-high-thickness cutting in high-speed wire electrical discharge machining

Determination of the Optimal Servo Feed Speed by Thermal Model During Multi-Pulse Discharge Process of WEDM