Abstract:High temperature proton exchange membrane fuel cells (HT-PEMFC) operated at a temperature range from 120 degrees C to 200 degrees C show high reaction kinetics, high tolerance of the Pt catalyst for impurities such as carbon monoxide and simplified water and heat management. HT-PEMFC has attracted great attentions in many applications including portable devices, unmanned vehicles and fuel cell cars. One of the essential components of the HT-PEMFC is high temperature proton exchange membrane (HT-PEM). The state-of-the-art HT-PEM is phosphoric acid (PA) doped polybenzimidazole (PBI) composite membrane. Phosphoric acid acts as the proton conductor while the PBI plays as a skeleton to hold the PA molecules and provides mechanical strength for the composite membrane. Nevertheless, the complex fabrication procedures and expensive cost hinder wide application of PBI in IIT-PFMPC. Alternative polymer skeletons including polyvinylpyrrolidone and amino-functionalized proton exchange membrane have been developed for the HT-PEM. Generally, the high proton conductivity of the HT-PEMs results from high doping level of PA. However, the plasticizer effect of PA molecules reduces the Van der Waals force among the polymer macromolecules. That leads to the low mechanical strength of the HT-PEMs. Cross-linking method significantly increases the mechanical strength of the HT-PEMs. On the other hand, the cross-linking reaction consumes the PA doping site of the HT-PEMs, leading to the low proton conductivity of these HT-PEMs. In this research, a novel self-crosslinked polyethyleneimine-polysulfone (PEI-PSF) HT-PEM with both high mechanical strength and high proton conductivity has been designed. The PEI molecules are anchored to the PSF backbones by chloromethylation and tertiary aminating reactions. That is prone to enhance the mechanical strength of the membrane. In addition, the PEI also acts as PA adsorption sites, which improves the PA doping level and proton conductivity of the HT-PEM. The degree of crosslinking is controlled by the degree of chloromethylation. The H-1 nuclear magnetic resonance characterization shows successfully graft of benzyl chloride onto the PSF backbone to form chloromethylated polysulfone (CMPSF). In addition, the X-ray photoelectron spectra confirm the reaction of PEI with CMPSF to form a self-crosslinked PEI-PSF membrane. With the increase of crosslinking degree, the PA doping level of the PEI-PSF membrane increases whereas its tensile strength decreases. A proton conductivity of 3.4 X10(-2) S.cm(-1) is obtained for a PEI-PSF membrane with a chloromethylation degree of 58%, denoted as PEI-PSF-58, and PA doping level of 122 wt% at 150 degrees C under anhydrous conditions. Meanwhile, the PEI-PSF-58 membrane remains excellent mechanical property with tensile strength of 30 MPa at room temperature. Moreover, HT-PEMFC based on the PEI-PSF-58 membrane exhibits a high peak power density of 200 mW.cm(-2) and outstanding stability under 150 C with a constant cell voltage of 0.4 V. In summary, a series of self-crosslinlced PEI-PSF HT-PEMs with both high proton conductivity and excellent mechanical properties have been synthesized. The self-crosslinking is a promising strategy to cope with trade-off between high proton conductivity and mechanical strength for the conventional PA doped HT-PEMs.

Simultaneously Enhancing Ionic Conduction and Mechanical Strength of Poly (ether Sulfones)-Poly(vinyl Pyrrolidone) Membrane by Introducing Graphitic Carbon Nitride Nanosheets for High Temperature Proton Exchange Membrane Fuel Cell Application

Polybenzimidazole/ionic-liquid-functional Silica Composite Membranes with Improved Proton Conductivity for High Temperature Proton Exchange Membrane Fuel Cells

Improved Performance of Sulfonated Poly Ether Ether Ketone/three-Dimensional Hierarchical Molybdenum Disulfide Nanoflower Composite Proton Exchange Membrane for Fuel Cells

Polybenzimidazole/cerium dioxide/graphitic carbon nitride nanosheets for high performance and durable high temperature proton exchange membranes

Polyethersulfone/polyvinylpyrrolidone/boron nitride composite membranes for high proton conductivity and long-term stability high-temperature proton exchange membrane fuel cells

Improved performance of poly(vinyl pyrrolidone)/phosphonated poly(2,6-dimethyl-1,4-phenylene oxide)/graphitic carbon nitride nanocomposite membranes for high temperature proton exchange membrane fuel cells

Ionically Crosslinked Composite Membranes from Polybenzimidazole and Sulfonated Poly (fluorenyl ether ketone) for High-Temperature PEM Fuel Cells

High-performance polybenzimidazole composite membranes doped with nitrogen-rich porous nanosheets for high-temperature fuel cells

Preparation of High Temperature Proton Exchange Membranes with Multilayered Structures Through Alternate Deposition of Carbon Dots@metal Organic Framework and Sulfonated Poly(Ether Ketone)

Semi-Interpenetrating High-Temperature Proton Exchange Membranes Based on Cross-Linked Poly(fluorenyl-terphenyl-piperidinium) and Poly(vinylbenzyl Chloride-Co-vinylbenzyl Chloride) for Fuel Cells

Sulfonated Graphitic Carbon Nitride Nanosheets As Proton Conductor for Constructing Long-Range Ionic Channels Proton Exchange Membrane

Submicro-Pore Containing Poly(Ether Sulfones)/Polyvinylpyrrolidone Membranes For High-Temperature Fuel Cell Applications

Graphitic Carbon Nitride Nanosheets/sulfonated Poly(ether Ether Ketone) Nanocomposite Membrane for Direct Methanol Fuel Cell Application

Fabrication of high performance high-temperature proton exchange membranes through constructing stable cation-rich domain in polybenzimidazole membrane

Polyoxometalate-Cross-Linked Proton Exchange Membranes with Post-Assembled Nanostructures for High-Temperature Proton Conduction

Self-crosslinked Polyethyleneimine-polysulfone Membrane for High Temperature Proton Exchange Membrane

Novel Nanocomposite PEM Membranes with Continuous Proton Transportation Channel and Reinforcing Network Formed by Electrospinning Solution Casting Method

Synthesis and Properties of Polysilsesquioxane Functionalized Poly(p‐terphenyl‐co‐N‐methyl‐4‐piperidine) Membrane for High Temperature Proton Exchange Membrane Fuel Cells

Cellulose Nanofiber-Embedded Sulfonated Poly (ether Sulfone) Membranes for Proton Exchange Membrane Fuel Cells

3d Network Structural Poly (Aryl Ether Ketone)-Polybenzimidazole Polymer For High-Temperature Proton Exchange Membrane Fuel Cells

Rough-surfaced Polybenzimidazole Membranes Incorporating Sulfonated Porous Aromatic Frameworks for Simultaneous Enhancement of Proton Conduction and Membrane Electrode Assembly Optimization